Limp Mode Scan codes

LIMP MODE

Limp mode has hit car owners like a pandemic, a pandemic that was pre-planned by the automotive industry, knowing full well that most car owners would be at a loss to repair it themselves and that it was  going to be a source of steady profit, a bonanza, a money spinner, a cash cow, a golden goose for them.

Virtually every car owner have experienced the wrath of Limp mode at some time or the other and are often helpless when it happens. Those of you who haven't had the displeasure of encountering Limp mod surely will, its just a matter of time - virtually guaranteed.

STANDARD FEATURE

Limp mode is a standard feature programmed into all post-1996 vehicles to protect their engines and driver / passenger when something goes awry with its EPC system, steering or braking system, etc.  The ever-aware sensing software will activate this feature when it detects abnormal readings from sensors, or compromised mechanical part operations that could potentially cause damage to the vehicle or harm to its occupants.

Every time when Limp mode is triggered the ECU will store a DTC in its non-volatile memory for later retrieval. And since Limp mode can be caused by any of several different engine components, the only way to track down the Limp mode problem is by way of a OBD-II scan tool. Scan tools may be considered the vaccines against this Limp mode pandemic, implying only those who have one will be able to fix their own cars.

ON BOARD DIAGNOSTICS

OBD-II (on-board diagnostics ver2) gave rise to a scan tool market and these scan tools comes in several makes and models, with capabilities ranging from the most basic to the most intricate costing from as little as a few bucks to tens of thousands. Most of the low end scan tools are VW compatible though some are not, whereas all the high end scan tools are compatible to virtually all cars, trucks and bikes.

SCAN TOOL

So, if your a car owner / DIY mechanic, it is imperative to get yourself a decent  aftermarket VW-Audi diagnostic scan tool. If you own an Audi,  Porsche, Bentley, Bugatti, Lamborghini,  SEAT, Škoda or Volkswagen I would suggest that you invest in the USB Cable KKL 409.1 VAG-COM Auto Scanner Scan Tool for VW/Audi (Blue) for starters. This cable supports the ISO9141 and KWP2000 transmission protocols and is usable with VCDS lite downloadable from the Ross tech website absolutely free. I started out with this rig and later bought several dedicated scan tools as well as bluetooth dongles that work with cellphones and software for my tablet. None as good or even comparable to VCDS (VAG-COM) HEX-V2 which surpasses the performance of most generic OBD-II tools, but its VW specific.

ELECTRONIC POWER CONTROL

Limp mode limits the amount of power to your engine and transmission thus delivers poor engine performance. EPC (electronic power control) may be lit and Malfunction Indicator Lamp (MIL)(K83) may also be lit. 

Limp mode scan codes:-

000289 (P0121) - Throttle Position Sensor (G69): Implausible Signal

000290 (P0122) - Throttle Position Sensor (G69): Signal too Low

004243 (P1093) - Bank 1; Fuel Measuring System 2

000545 (P0221) - Angle Sensor 2 for Throttle (G188): Implausible Signal  

000808 (P0328) - Knock Sensor 1 (G61) Signal too High - Intermittent

05445 (P1545) - Throttle valve control system, Malfunction

05464 (P1558) - EPV throttle Drive - G186, Electrical malfunction in circuit

01314 - Engine control module / No Communications

17252 (P0868) - Transmission Fluid Pressure Adaptation at Limit

             

WIRING HARNESS

As can be seen from the above, all these Limp mode scan codes / faults are associated with a VW wiring  harness problem and is normally a connector problem but it can also be the a failed throttle body, a knock sensor, the torque circuit, a brake light. The gears inside of the throttle body can strip or becomes clogged with dirt. Remember the last resort is a failed engine control unit (ECU).

Electronic Vehicle Architecture

The Electronics  Industry has had the fastest growth in the shortest amount of time, when compared to any other industry worldwide.  But before I expound on that, let me just say that, the invention of numerous mechanical contraptions during the late 1800s, like  James Watt's steam engine for example, started the transition towards new manufacturing processes which collectively gave rise to the Industrial Revolution. Much later Samuel Finley Breese Morse invented the single-wire electric telegraph system and developed the Morse  Code. 

A bit of History

Sometime thereafter Alexander Graham Bell invented the first practical telephone system. Their's and the collective  efforts of so many others, without discounting anyone's  inventions and efforts, changed telecommunications forever. Ancient records show that  the first streets of Baghdad were paved with tar, that the Babylonians used asphalt to construct the walls and towers of Babylon.  The I-Ching even bears testimony to the fact that the cites of China used oil, extracted in its raw state some  2000 years ago before refining was first  discovered. Implying that the petroleum industry is not new, but that the current status of petroleum is a key component of politics,  technology and society today.

No tot digress, tar, crude oil and pitch, were used as a sources of fuel long before paraffin was even distilled from it. The thin distilled  paraffin was normally used as fuel for lamps whereas several hundreds of years later, the thicker residue was used to lubricate machinery. In and around the  time when oil/gas/fuel/petroluem was extracted from coal, Étienne Lenoir successfully built the internal combustion engine and innovated by Nikolaus Otto, who became famous for successfully developing the compressed charge internal combustion engine - the Otto engine.  

Assembly lines

Henry Ford on  the other hand wasn't an inventor nor an innovator as many have been led to believe, but he was rather a business magnate and a captain of  industry, who formed the Ford Motor Company, and sponsored the development of the "assembly line technique" for vehicle mass  production. One can therefore confidently say that their combined efforts, without diminishing any other contributor's efforts by the very least, over a period of some 200 years, are partially responsible for the social changes and economic development that shaped  societies that we live in today. This was  the infancy of the Automotive industry.

However, compared the Industrial revolution, modern day electronics would be equivalent to a Global Coup. Initially there was the  vacuum tube aka the electron tube, colloquially known as a valve. It gave way to the trusty transistor and discrete components which gave rise to the  analogue Integrated Circuit (IC) aka chip, followed by digital Transistor/Transistor logic (TTL) chips, followed by complementary  metal oxide semiconductors (CMOS), then digital semiconductors like ROM (digital read only memory), RAM (random access memory),  EEPROM (electronically erasable programmable read only memory), followed by large scale integration chips and VSLI (Very Large Scale  Integration Chips). 

Electronics and Software

With the advent of multilayer circuit boards and surface mounted technology, microcontroller SoC (system on a chip)  and microprocessors (µP) became pervasive. Assembler language was superseded by several high level languages for programmable chips and  software programming sat at the heart of most electronic devices and electronic systems. All of this happened in 50 years of electronics  as opposed  to 200 years of mechanical devices.

So you may ask, what has all this history to do with Volkswagen, Audi, Seat and Skoda and for that matter all other modes of transport  from plans to trains? Well the short answer, everything! Much like the Industrial Revolution with its mechanical ingenuity;  cars and planes were also predominantly mechanical since its inception, its mechanical ignition system was prone to imprecise ignition timing, resulting in improper fuel mixture burn, thus increasing its exhaust pollution. 

With the rise of telecommunications, so did  the electric wires, and electrically controlled gauges, relays and switches in cars and planes multiplied. The ever inflating cost of  gasoline then triggered the invention of CDI (Capacitive Discharge Ignition systems) which is in fact the first type of electronic  contraption integrated into the ignition system of a vehicle in order to, more precisely control its ignition timing, making it more  fuel efficient. 

These devices were available as add on kits and not produced as standard equipment in cars at the time. The preferred standard  equipment was the IDI  (inductive ignition system) and is the most common ignition system found on all cars built prior to 1980. It used a coil and distributor incorporating breaker points in its ignition system that was prone to ware-out due to arcing on  contact. During the 80's engines still used a coil and distributor to achieve dwell but it was somewhat computer controlled and by  the 90's the automotive computer evolved to ignition modules and the ECU, replacing the coil with a power pack. 

However, with the constant and  ever increasing price of gasoline and looming environmental concerns centred around vehicle exhaust pollution, the automotive  industry then accelerated its research and development into newer more compact fuel efficient power-train systems capable of higher  power output with enhanced robustness with a open policy towards alternative fuels.

New generation cars

So, by the 90's the Insulated-Gate Bipolar Transistor (IGBT) was introduced into the ignition system as discrete component connected  to the ECU called OBD - On-Board diagnostics. By 1993 the CAN protocol was standardized by ISO which led to its increased popularity  and adoption across the automotive industry.  By 1996 OBD had evolved to OBD-II and the discrete IGBT evolve into a IGBT module  integrated into individual coils itself. Starting from Y2k ignition systems were all ECU based but power packs were replaced by a  dedicated coil per cylinder, yet cloning the use of an Insulated-Gate Bipolar Transistor (IGBT) as discrete component connected to  the ECU. 

Communication Buses

From 2004 to 2010 the discrete Insulated-Gate Bipolar Transistor (IGBT) integrated into individual ignition coils evolved to a smart IGBT alongside the ECU.  The automotive ignition system had undergone a complete revolution which contributed significantly  to the system’s efficiency, exhaust pollution reduction, and robustness. By which time the use of wires had been minimized in  preference of a bus network which supported vehicle weight reduction and  vehicle cost. Copper wire have been replaced by fibre optic cable to facilitate faster communication. Some of the most important bus communication systems are CAN-Bus, Lin-Bus, MOST and  FlexRay.

Actuators and sensors, electronic control modules, Can-Bus and the ECU collectively facilitating Electronic Power Control (EPC) aka electronic throttle  control (ETC), Electronic Exhaust gas reticulation (EEGR), Electronic Valve Control (EVC), Electronic fuel injectors and so much  more, are just a small part of the overall influence that electronics have had on all vehicle engines. Other subsidiary programmable electronic  modules which are smaller computers in their own right now permeate cars, bikes, planes and boats, all connected together by at least three network systems. 

CAN-Bus is a multi-master twisted pair wire system reserved for high speed control systems like brakes,  whereas LIN bus is a single master, single wire system for low level communication for use by the rain sensor, sun roof, internal heating, and  the infotainment-bus, is a slow-speed system reserved for radio, GPS, internet communication, etc. Each system communicating with each  of its nodes in its provided protocol, each having different data transmission rates. By incorporating this level of electronics into cars, it has vastly improved stichometry and overall engine  performance, its economy, its driveability  and its safety besides reducing  emissions. 

Inept electronic knowledge

However, few mechanics know sufficient about electronics with its combinational logic, digital multiplexing, bits and  bytes, start and stop bits, fixed frames, software, etc to repair these cars packed with intercommunicating electronic modules. Even though scan tools have vastly increased their chances at successful repair, not knowing how to interpret fault codes further disadvantages them, not to  mention how frustrating it is for the vehicle owner who gets stuff around by incompetence. And here I’m even refereeing to the  "Automotive Technicians" employed by their respective automotive agents, who are more often than not incapable of repairing vehicles fitted with OBD-II. I'm quite sure there are several hundred if not thousands  of  VW owners who would concur.  How is it even expected for the DIY mechanic to fix it him or her self if the agents can't. Needless to say that  with continuous improvements comes great complexity and their successful  strategy to part us with our hard earned monies.

Diagnostic Trouble Codes abbreviated as DTC have been around for approx 30 years and is a component of OBD-II (onboard diagnostic system ver.2). These codes can be found stored  in the ECU's non-volatile memory for later retrieval by way of a scan tool. DTCs are displayed specific to the kind of problem that the system can or does detect from inside of a car engine/transmission, chassis, body or network.

Scan codes

In reality DTC codes can assist "automotive technicians", DIY mechanics and car owners to understand the problem with the car and possibly point them towards the nature of the problem or at the very least the system concerned. Bearing in mind many DTCs are generic but many of them are manufacturer specific and is best interpreted by consulting the car's manual.  Generic codes are defined by the EOBD / OBD-II standard and will therefore be the same for all car manufacturers.

But, let me break it down to for you. All diagnostic codes are alphanumeric as in P0XXX. It start with a letter followed by 4 numbers, as in P0303. This initial letter is P but can also be either B, C or U. They stand for Powertrain, Body, Chassis and Network respectively. The first numeral following the letter signifies whether the fault is generic of manufacturer specific. Since its a 0, its a generic code but if had a 1 then it would be manufacturer specific. The number 3  following the first 0 can be any numeral between 1 and 9. This number directs you to the subsystem of the car and is as follows.

Px1xx Air and fuel metering

Px2xx Air and fuel metering

Px3xx Ignition system and misfires

Px4xx Auxiliary  / additional emission control

Px5xx Speed control and idle regulation

Px6xx Communication /computer output signals

Px7xx Transmission

Px8xx Transmission

Px9xx Control modules, input and output signals

The final two numbers (xx) designate the individual components / sensors /actuator that threw the error. For example P0300 says, it's a powertrain error, it's generic in nature, it's in the ignition system and it's a random misfire. 

Whereas P0301 says misfire by cylinder No. 1,

Whereas P0304 says misfire by cylinder No. 4,

Whereas P0308 says misfire by cylinder No. 8,

Whereas P0312 says misfire by cylinder No. 12,

Likewise P0403 says, its a powetrain error, it's generic in nature, it's in the auxiliary / emission system and that the "Exhaust gas recirculation control malfunctioned"

Likewise P0501 says, its a powetrain error, it's generic in nature, it's in the speed control/regulation circuit and it's the "Vehicle speed sensor is out of range".

Like wise P0656 says,its a powetrain error, it's generic in nature, its in the computer/communication system and that its the "Fuel level output electrical sensor/circuit" 

Then there are also VAG specific 5 number numerical codes that coincide with P,B,C and U codes, like 16692 which coincides with P0308 (Misfire Detected on Cylinder 8)

And 17026 which coincides with P0642 (Knock Control Control Module Malfunction)

VOLKSWAGEN HACK

VOLKSWAGEN  HACK

Since the inception of OBD-II car manufacturers were mandated to install immobilizers on all vehicles built from 1996 onward. The preferred technology used by more than a dozen vehicle manufactures which includes Audi, Volkswagen, Volvo, Fiat, Honda and Chevrolet, was the Magamos Cryto transponder, viz ID48. A passive glass RFID chip used for authentication and preventing hot-wiring, embedded in the keys of these vehicles had a vulnerability. Electronic vehicle immobilizers in general have been very effective at reducing car theft to date, but today some 24 years later virtually each and every car immobilizer manufactured is defunct and the security they provide is worthless because its been hacked. 

This vulnerability in automotive security was cracked as long ago as 2013 by computer scientist Flavio Garcia and a team of researchers at the University of Birmingham. By implication they suddenly had access to a 100 000 000 Volkswagen vehicles across the globe. However, before they could publish their research to general public consumption, they were hit with a lawsuit which caused a two year delay but their paper was eventually publisized.  Their article reveals numerous weaknesses in the design of the cipher, the authentication protocol and also in its implementation allowing them to gain eavesdrop on authentication traces. This was sufficient  to recover the 96-bit secret key with a computational complexity of 256 cipher ticks and the secret key after 3 × 216 authentication attempts. This was all achievable in under  only 30 minutes. 

This all came about when local police was baffled that cars were being stolen and nobody could explain how. But they suspected that the thieves  used some kind of ‘car diagnostic’ device to bypass the immobilizer and start a car without a genuine key. In order to solve this mystery Flavio Garci and his researchers  were motivated to evaluate the security of vehicle immobilizer transponders. At the time it was commonly known hack attacks for other widely used immobilizer transponders, viz DST40, Keeloq and Hitag2 though  not much was known about the vulnerabilities of the Megamos Crypto transponder.

The Megamos Crypto transponder has since been cracked by the university team in their attempt to discover how "the thieves did it'' and realized how easy it was. This speak volumes about the technical, cryptographic, algorthmic, code cracking software savviness of the thieve who figured it all out even before the scientist and his team.

So now a team of researchers from the University of Birmingham and a German engineering company viz. Kasper & Oswald intent revealing two distinct vulnerabilities they say affect keyless entry systems. Using these two vulnerabilities resourceful thieves would be able to wirelessly unlock virtually every vehicle that  Volkswagen manufactured during the past twenty years.  These include  cars from manufacturers like Alfa Romeo, Citroen, Fiat, Ford, Mitsubishi, Nissan, Opel, and Peugeot. 

No car with the most sophisticated immobilizer built during this time is immune to evaporate in the middle of the night, unless protected by old school brute force, steering and gear locks, parked inside a garage protected by half a dozen pitbulls.

FOB key

FOB key Tips and Tricks

With the advent of electronics, life for many has become somewhat easier and high-tech. Case in point, the trusty television cordless infrared remote control and its earlier ultrasonic equivalents. Both circumventing the "jack in a box" activity we all so enjoyed, during the days of legacy non-remote control television sets. Likewise, our cars has also gone high-tech, flaunting electronic car key remote controls with features never seen before. No longer using infra-red or ultrasonic but a coded signal modulated in a wireless radio frequency in the 315 to 434 mhz range.  

Not only has remote controls replaced the aim push and turn function our writs won't forget but has gone far beyond locking or unlocking doors, remotely starting the car,  emitting chirping sounds with flashing hazards to assist us to find our car in a fully populated parking lot. These fancy electronic remotes control marvels are referred to as a "fob", an acronym for Frequency Operated Button. In a previous lifetime, a "fob" was the name given to the chain connecting a packet watch to its owner. Today the "fob" is form of invisible tether, chaining the remote to the car. Some say the word "fob" comes from the German word Fuppe, meaning pocket. I suppose that's where its going live when its not on the car. 

Manufacturers are constantly adding more features to the already multitude of functions that make both the car and the key "fob"  more useful than ever before. But its not all done in the name of the client. It has allowed manufacturers skimp of a few items that drove the price of the car up ever so slightly. Fobs allowed them to only install a single driver-door key cylinder, thereby saving on the cost of the other three, the installation time and somewhat reduced the weight of the car, alongside so many other items.  Collectively contributing to its overall fuel economy. But the quality of this driver's door cylinder isn't design nor manufactured robust enough and daily use. It's intended for emergencies only use, when the key is either locked inside the car or the battery had died of the "fob"  has gone faulty. Using it daily will kill that lock before you can fluently say, Rumplestillhurrywisepunywalgeemuckagee.

VW button mechanically operated switch blade "fob" comes in 2 basic flavours -- 2 button and 3 button.  One buttons specifically  for lock and the other for unlock. Keeping the button depress for a few seconds activates windows either open or close whichever is needed.  A flashing LED on the remote denotes communication.
Depending on the ECU/ control module settings, button depresses can be either audible or visible or both. Meaning a peep or two from the hooter and single or double flashing of the hazard light, or nothing based on personal preferences.  In the case of a 3 button, much like the 2 it just has a 3 for trunk release. In those vehicles with an auto lift trunk piston feature, pressing the unlock button will is open the trunk completely. 

The "fob" is a sophisticated piece of equipment but when it misbehaves, and you have to make multiple attempts before it performs a function, it could be that the battery is going flat. This is easily verified by viewing the intensity of the blinking LED on the "fob". A faint LED is a tell tail sign the the battery is giving up the ghost. When the battery is replaced, the "fob" needs to be reset. This can be done by pressing the lock one second while the car is locked. Nothing will happen except perhaps a low volume yet mechanical clunk. Remove the cylinder cover, unlock and re-lock your your car with the master-key, not spare key. This action will cause your "fob" to reset itself.

When the car wont start and the light is flashing the key, keep it close to start button to make reading the key easier so that the car will start. VW Tiquan and some other later VW's allows  "fob"  synchronization and reprogramming of driver preference like, radio stations, mirror positions, etc.  Since a detailed rundown of the procedures are beyond the scope of this post, your owners' manual is by far your best bet. 

EPC issues

EPC Issues

EPC complaints have become the most common Volkswagen fault and outstrips check-engine-light three to one. It is one of the most tiresome and frustrating  faults to diagnose and repair because the only way of knowing that your most recent repair cured your EPC problem, is when it does't occur in the same situation under the same conditions thereafter. Mechanisms generally refer to Electronic Power Control (EPC) faults as evil, a waste of time and the cause of embarrassment.

Many disillusioned VW car owners can confirm that they've taken their vehicle to at least 2 different workshops to fix their respective EPC light problem. Often wanting a refund from the first workshop as they didn't fix the EPC issue, but only said they did. It's also known fact that tons of spare parts suspected of causing EPC have been replaced that didn't need replacing in the first place. Trial and error EPC repair seems to be the order of the day among motor mechanics. Even the agents are guilty of this and VW car owners are generally fed-up of mechanical and electronic competence. Many car owners and DIY mechanics are longing for the days when cars had a lot less electronics, were easier to diagnose and repair and one didn't need a degree in automotive engineering to replace something as meager as a MAF sensor. The word EPC among many others, is just one of the mechanical jargon that has come to invade the car industry. There are so many; to list just a few. Several of them capable of throwing an EPC light.

AIR: Air Injection System
ACC: Adaptive Cruise Control
ABS: Antilock Braking System
AWD: All-Wheel Drive
BHP: Brake Horsepower
CEL: Check Engine Light
CO2: Carbon Dioxide
CKP: Crankshaft Position Sensor
DLC: Data Link Connector
DDI: Direct Diesel Injection
DPF: Diesel Particulate Filter
DRL: Daytime Running Lights
DTC: Diagnostic Trouble Codes 
DSG: Direct-Shift Gearbox
ECT: Engine Coolant Temperature
ECU: Electronic Control Unit
EGR: Exhaust Gas Recirculation
EPA: Environmental Protection Agency
ESC: Electronic Stability Control
ESP: Electronic Stability Program 
FSH: Full Service History
FWD: Front Wheel Drive
IAT: Intake Air Temperature
KPH: Kilometres Per Hour
LED: Light Emitting Diode
LSD: Limited Slip Differential
LPG: Liquid Petroleum Gas
LWB: Long Wheelbase
MAF : Mass Air Flow (sensor) 
MAP: Manifold Absolute Pressure
MIL: Malfunction Indicator Light
MPV: Multi-Purpose Vehicle 
OBD: On-board Diagnostics
PCM: Powertrain Control Module
RPM: Revolutions Per Minute
RWD: Rear Wheel Drive
SUV: Sport Utility Vehicle
TDC: Top Dead Center
TCS: Traction Control System
TCU: Transmission Control Unit
TPS: Throttle Position Sensor
VCM: Vehicle Communications Module 
VIN: Vehicle Identification Number
VRM: Vehicle Registration Mark
WOT: Wide Open Throttle

The letters EPC in the automotive sector initially meant Electronic Parts Catalogue. Recording every conceivable component used in the  manufacture of that car, listed in alphanumeric order. Some EPC are exclusively online versions, or downloadable as pdf. Some cover specific cars  and others cover several makes of cars and is normally free, whereas the more elaborate EPCs with specialist automotive service data is charged for per search or as a monthly subscription.

For example, the ETK 2018 EPC  is specific to BMW,  Rolls Royce, Mini and the Chinese Zinoro which is the luxury automobile brand owned by BMW Brilliance specializing  in electric vehicles. ETK comes at an exorbitant price, in either downloadable or CD/DVD form. The Volkswagen  ETKA online /  ELSAWIN EPC is specific to Volkswagen, Audi, Seat and Skoda and spans 6 CDs and is also fairly expensive. It is an encyclopediac like compendium covering VW, Audi, Seat and Skoda vehicles manufactured between 1947 and 2018 in varying degrees of detail. 

It also includes the actual service & repair software used by factory technicians at Volkswagen, Audi, Seat, Skoda and their dealer workshops throughout the world. As such it would be in indispensable resource for the Volkswagen enthusiast but is also overkill for most. However most modern day cars have an EPC circuit which essentially deals with the torque of the vehicle. Using one of these catalogues and its diagnostic diagrams to identify these components and problems is one of the easiest ways of fixing EPC problems. To fix your EPC problem, click here, here or here.

_________________________________________________

EPC light came on and can't start the engine,  / EPC warning symbol came on today while driving, / VW Polo EPC  Warning Light came on and lost power.  / Can I drive with EPC light on? / VW Polo no Throttle and EPC light on, / What causes the EPC light to come on? / What does EPC mean on the dashboard? / What is an EPC light?  / What is limp mode,  / What is limp-mode home?, / What is the VW EPC Warning Light, / What is EPC on a Volkswagen? / What does the EPC light mean on a VW, / What does the EPC Warning Light on my dashboard mean, / What does it mean if the EPC warning light comes on in a Volkswagen, / How to Fix EPC Light on a VW,  / What is an EPC light on Volkswagen?, / What Is the VW EPC Warning Light? / What does it mean if the EPC warning light comes on in a Volkswagen?  / What does an EPC light on the dash of a Polo car mean?

VW Beginings

VW's humble beginings

Volkswagen, derived from the German words "Folk's Wagon" or "People's Wagon," traces its roots back to 1937 when it was founded as a pivotal player in the automotive industry. Over the decades, it has grown into the largest car manufacturer globally, boasting an extensive lineup of vehicles. One of its most iconic creations is the Volkswagen Beetle, which has left an indelible mark on automotive history.

VW Beetle 1937

Commissioned by Adolf Hitler, the leader of Nazi Germany, the Volkswagen Beetle was conceptualized and designed by Ferdinand Porsche, the renowned Austrian-German automotive engineer and founder of the Porsche car company. 

The Beetle first rolled off the production lines in Germany in 1937 and remained in production until the late 1970s. However, its legacy endured, with production continuing at Volkswagen's Puebla facility in Mexico until 2003. In total, over 21 million Beetles were manufactured, earning it the affectionate moniker of the "poor man's Porsche."

The Beetle's success paved the way for other Volkswagen models, including the Type 2, famously known as the VW 'Bus' or Microbus, and the stylish Karmann Ghia. Subsequent iterations, such as the Type 3 'Ponton' and the Type 4 411/412 family car, further solidified Volkswagen's reputation for innovation and versatility in the automotive market.

Despite its iconic status, Volkswagen eventually ceased production of the Beetle, citing feasibility concerns in an increasingly competitive market. As other car manufacturers introduced similar-sized four-door vehicles, the Beetle, Karmann Ghia, and 'Ponton,' all two-door models, faced challenges in meeting the evolving needs of consumers, particularly in the taxi industry. The practicality of four-door vehicles for passenger transportation outweighed the convenience of two-door models, leading to a shift in consumer preferences.

This transition marked a pivotal moment in Volkswagen's history, reflecting the company's adaptability to changing market dynamics while staying true to its commitment to innovation and excellence in automotive engineering. While the Beetle era may have drawn to a close, its legacy lives on, serving as a testament to Volkswagen's enduring impact on the automotive landscape.

 The New Beetle was manufactured from 1998–2011 which included  a 2-door coupé/ convertible but wasn’t  a replacement for the original Beetle,  the VW golf and VW Passat was.  The original Beetle, the VW Golf  and the VW Passat were the three top VW cars in the history of the automaker, all three of which stood out for its simplicity, affordability and quality for more than thirty years.  The Volkswagen Beetle  is a two-door economy car, intended for five occupants  and sported an air-cooled rear mounted engine.

VW Fuses Switches and Relays

VW Fuses  Switches and Relays

Single Pole Single Throw

Electrical switches comes in several configurations, but are normally classified into only four types. The most common switch is the single pole single throw, abbreviated as SPST. This implies it has one contact that is normally open —abbreviated N/O—  which is closed when the switch is flicked. This type of switch is either on-or-off / open circuit or closed circuit. This switch also comes in the form of a push button switch which is normally open and closes when pushed but when released it open once again. It is also known as push-to-make, abbreviated PTM. An example of a PTM is a door bell switch or a cars hooter or the individual keys on a keyboard. Push button switches also comes in a normally closed configuration and opens when pushed, but when released, it closes again. Commonly  known as push-to-break, abbreviated PTB. An example of a PTB switch is used to release a door, held closed by an electromagnet.

Suzuki GS500 GSXR1100, Honda  VT 500 VT600 VT700 VF750,
Kawasaki ZX1000 ZX 1100 Solenoid

Single Pole Double Throw

The second and slightly more advanced switch is the single pole double throw switch, abbreviated as SPDT. This is a three terminal switch which toggles between two states when switched. SPDT are in essence two switches in one package. The one switch is normally open whilst the other is normally closed. By flicking the switch the two switches reverses their roles. The normally open switch is then closed and the normally close switch is opened. By connecting a SPDT at either end of a long passage to turns the lights or off, one is able to enter the passage at one end, turn the lights on and when exiting the passage at the other end switch the lights off. SPDT can be used as a SPST in an application by just using the centre contact and either one of the other two contacts, depending on what type of switch you need, N/O or N/C.  SPDT switches are also available with a centre-off position, known as momentary (ON)-OFF-(ON) switch.

Volkswagen 4H0951253 Starter Relay 645 and 1J0906381A Fuel pump relay 109. 

Double Pole Single Trow

The third type of switch is the DPST and is similar to the SPST switch in operation except that it has a pair of on-off switches that switch together. It is commonly used to connect / interrupt both the live and neutral supplies in a circuit simultaneously or it may be used to switch two separate circuits simultaneously. Computer power supplies have DPDT switches as a safety feature to avoid getting electrocuted whilst working on the power supply if only one pole was switched. 

Double Pole Double Throw

The fourth type of switch is the DPDT and is similar to the SPDT switch in operation except that it has a pair of on-on switches that switch together. It is commonly wired to reverse the direction of a DC motor or be used to switch between to different colour LEDS. DPDT can be used as a DPSP in an application by using the centre contact and either one of the other two contacts and duplicated on the paired switch. DPDP switches are also available with a centre-off position, known as momentary (ON)-OFF-(ON) switch.

Switches 

Switches switches come in various shapes among which are Toggle switches, limit switches, reed switches, micro switches, mercury switches, rotary switch, slide switch, rocker switch, pneumatic limit switches, selector switches and getting the right switch for the job cam sometimes be tricky and may be better suited by using a relay. Many switches also come with a rubber jacket to make it  waterproof. However that doesn't imply you can submerse the switch in water, it is more a splash proof cover than a water proof one. There are switches suited for using under water, for example a floating mercury switch. when a vat or tank is filled with liquid, the switch would float in the upright position but when the liquid falls below a certain lever  the switch would float upside down and trigger. Perhaps turning on a pump that would fill the tank or vat once again.

Whats a relay?

Having discussed switches you may ask what does switches have to do with relays. The simple answer is, a relay is essentially a remotely controlled switch. Relays are controlled electrically rather than mechanically, hence they're known as electro-mechanical relays. They are commonly used in automotive design, where high current devices can be switched from a cockpit fairly cheaply. In stead of using long lengths of thick high current cable and a substantially heavy duty on-off switch to control a heater or a motor situated some distance from the driver; a small low current switch and a length of thin low current cable and a relay switch with heavy contacts would suffice. Every relays has a solenoid configured as an electromagnet. So when the solenoid is activated by a trigger voltage, the electromagnet pulls a set of heavy duty contacts to make or break a circuit. Relays are versatile and can function as a simple spst switch, or a more advance spdt switch of a dpst switch or a dpdt switch depending on the circuity it needs to control.

Volkswagen Solenoids

Sometimes you may need a switch with more contacts than the best switch you can find, and this is where relays outweigh switches. Relays also cost less than the combines cost of all the switches that it replaces or that can do the job of.  Volkswagen have several relays throughout its electrical system and the most hardworking relay, is the starter relay.  Starter relays form part of the starter, the reasoning, is to keep high current conductors as short as possible. However many cars have a second relay inserted into the fuse panel that powers the starter solenoid. So when you turn the ignition key to start your car, the starter relay contacts in the fuse box sends 12V to the starter solenoid on the starter. This solenoid's contacts throw and sends 12V from the thick battery cable that's connected to one side of the starter solenoid directly to the starter's field coils, causing its armature  to spin. But at exactly the same time the solenoid performs a dual function as it kicks the bendix forward into the ring gear's teeth.  The starter's force of rotation is sufficient to crack the engine and if all's well, the engine with start. 

Volkswagen

Volkswagen

Volkswagen cars are extremely popular. In fact, they are so  popular that Volkswagen as a brand is the favourite car of many South Africans, besides being the most popular car sold on the South African market. Volkswagen cars are also popular elsewhere and are sold in virtually every country throughout the world; but its popularity and its global acclaimed robustness doesn't make it indestructible. 

Volkswagen cars give problems, in fact they are more troublesome now, than they've ever been. The reason, the ODB-II system with its ever increasing number of ECUs.  This system has several features that means well, like controlling toxic emissions, like giving you the best fuel efficiency;  and is capable of detecting minor issues or glitches before they actually occur, among so many other beneficial features.

However, like every coin has two sides, and as there are always two side to every story, there is also a reaction to every action.   Meaning for every beneficial feature of OBD-II there is a detrimental feature to OBD-II. OBD-II is essentially a computer system with a host of additional computer modules remotely placed through the body of the car, some of which have an effect on the Engine ECU. 

These modules or sub-ECUs oversee various features, like an airbag controller module/ECU that supervises the airbag. This module is connected to crash sensors placed in strategic positions in the car, that triggers when a crash occurs and ensure that the airbag is inflated within the required time frame. Then there is also an immobilizer module/ECU that supervises the starting process ensuring the correct code from the key transponder chip corresponds with its randomly generated code. There is also an ABS Brakes module, a Gateway module, a Steering Assist module, an Instrument Module, a Central Convenience module, a Radio module, to mention but a few. All of which are potentially sources of problems.

If we only look at the Airbag and the Immobilizer modules/ECUs, both will impede driveability and the starting of the car, by influencing the Engine ECU. If the Engine ECU doesn't received the expected signal from either, it would refuse to start the engine. The Engine ECU is the heart of the ODD-II and normally sits in the engine compartment or inside the car under the dashboard. All three these modules/ECUs mentioned, sometimes also referred to as nodes, are in within a meter of on another but here's the downside. 

To get them to sing in harmony they are connected together by a wiring harness. This wiring harness plugs into each and every node in the car, and also share a common twisted-pair wire-connection  called a bus which is terminate at each of its ends with 120 Ω resistors. This bus can be either Controller Area Network (CAN) or  Local Interconnect Network (LIN) or even FlexRay. Each module also has a power supply and an earth connection. All of these wire connections are potentially sources of problems.

The average car can have anything between 5 and 100 modules/ECUs, some ECUs have as few as six connections and others as many as 80 or 94 or even more. Each of these physical connections are prone to corrosion, metal fatigue and physical flexing due to suspension vibration and is a source of future problems. Some ECU's earth connection is solely made through body contact and if it looses contact due to vibration or water ingress, it will undoubtedly cause an error or errors. 

These errors are stored in the ECU's non-volatile memory which can at times be quite cryptic. I can say that without doubt that every "automotive technician" has misinterpreted DTCs and replaced unnecessary components in the process. Even returned cars to the owners claiming that they solved the problem but didn't, they were just under the misapprehension that they did.

If any connection out of this glut of connections becomes intermittent for some reason or the other, it would be like trying to find a needle in a haystack and there are so many "automotive technician" that have never touched a needle nor even seen a haystack, let alone find a needle in a haystack. Be that as it may, one of the advantages of OBD-II is that it increases the likelihood of a DIY fix, providing the fixer is fairly dexterous and have some electronic and mechanical knowledge and have access to a diagnostic scanner.

A fairly common plug connection that goes intermittent, is the one that connects to the throttle body. It supplies the voltage to the stepper motor that controls the throttle butterfly valve. This plug also sends feedback to the ECU so that it knows how wide open or close the valve is. So many mechanics insist on stripping the throttle body due to a throttle body DTC and claim after cleaning it, the problem was solved. However a few days later the error would be back. A word of caution, Don't suspect replaceable parts especially if it has less that 100 000 km on its clock. Exhaust the possibility that it's a possible wiring harness problem before replacing expensive items because they can never be returned to the agents after its been installed.

Another intermittent connection it the 6 pin plug that interfaces with the accelerator pedal. This is a common source of the dreaded EPC problem. In many cases, a squirt of electro cleaner may solve this problem. That's to say until it's triggered by something else. It's worth while to check the voltage supply stability and ground impedance between the 6 pin plug and the ECU. Remembering that the pedal's earth connection is grounded inside the ECU and the ECU is grounded to the body or chassis and not the engine. In some cases, the ECU will function normally because its metal casing is not earthed.

Also, don't be tempted to earth the pedal earth directly to the body when there is a  significant resistance reading. Rather replace that portion of the wiring harness that may have gone high resistive. Offset ground connections and ground loops can cause voltage drops and magnetic impedance which are major causes of noise hum, and interference in computer systems (ECU). So don't alter the the existing ground connections because it could introduce issues you've never experienced before.

What does it mean if the EPC warning light comes on in a Volkswagen?

What does it mean if the EPC warning light comes on in a Volkswagen?

Since the inception of the motor vehicle, several manufactures have claimed that their brand of car, has sold the most units globally. But since there is no definitive comparative yardstick to measure the exact amount of units sold,  Volkswagen claimed that their Volkswagen Beetle is the "bestselling car in history", considering they had sold more than 21 million units. To be more exact, The New York Times, date July 31, 2003 stated that the very "Last Volkswagen Beetle" manufactured was in fact number 21,529,464. 

Ford on the other hand manufactured their 1 millionth Model T's during the last month of 1915, with total sales of 15 million units produced by 1927 when they ceased production. In 1972 Volkswagen broke Ford's record when their 15,007,034th Beetle came off the production line in Puebla, Mexico. 



Be that as it may, Toyota boasts that in reality, their Toyota Corolla is the "bestselling automobile in the world", after reaching their 40 millionth unit in July 2013. But regardless of their claim, Volkswagen is undoubtedly still the "bestselling automobile in the world" seeing that the Volkswagen Beetle didn't change its shape or form since 1945 up to and including 2003, whereas Toyota used their Corolla label for eleven generations of Toyota cars, built since 1966 and this very Corolla label is still in common use. Non-the-less, statistically Volkswagen has been the best selling car globally until late 1998; meaning the Volkswagen Beetle remains the "bestselling vehicle ever". 

Enter the Volkswagen Kombi, Volkwagen City Golf, Volkswagen Fox, Vokswagen Jetta, Volkswagen Golf, Volkswagen Polo, Volkswagen Passat, Volkswagen Kombi, Volkswagen Sharan, Volkswagen  Toureg, Volkswagen Amrok, Volkswagen Transporter and the list goes on. However this entire Volkswagen fleet doesn't come without their fair share of  problems. The most common of which is probably the EPC light accompanied by limp-mode home.

What is the VW EPC Warning Light, 

The Electronic Power Control warning light, is commonly known as the EPC warning light. It's a dashboard warning indicator that suggests that there may be a problem with your Volkswagen’s throttle system. The throttle system consists of the accelerator pedal, the throttle body, traction control, cruise control, and the ECU, which is collectively called the drive-by-wire system. 
The drive-by-wire system is also sometimes referred to as an Electronic Throttle Control (ETC), roughly described as a technology that electronically "connects" the accelerator pedal to the throttle, instead of a mechanical linkage. 

In a drive-by-wire system, an electric stepper motor determines the angle of the throttle valve. How wide it opens or closes, is calculated by a —closed-loop control algorithm— software controlled embedded system built into the ECU. The ECU makes decisions based on various input data from several sensors, among which are, the accelerator pedal position sensors, engine speed sensor,  vehicle speed sensor, and the cruise control switch. The Electronic Control Unit (ECU) can also be described as a computerized ignition / engine management system  that operates in conjunction with the stability and cruise control systems. When the EPC light comes on, it means the problem is not emission related, whereas the Check Engine Light (CEL)indicates emission related problems but when it lights up, can be accompanied by the EPC light. If the EPC warning light comes on in your vehicle, it is important to have it seen to as soon as possible, because it you don't invariable it's going to trigger again when you least expect it.

EPC Car Warning Light

When the EPC light comes on in your Volkswagen, its throttle may be limited in power, yet have sufficient power to drive the car to a dealership or mechanical workshop, but it shouldn't be driven elsewhere. This is called limp-mode-home. Limp mode home is  inherent in its the software design in order to to protect the car from run-away and  its passengers from possible injury. Volkswagen cars equipped with a Electronic Stability Program (ESP) program, will display its ESP light instead of the EPC light and may automatically trigger the car into limp-home mode. 

Vehicles fitted with Traction Power System (TPS) are also prone to enter into 'limp-home-mode'  which effectively prevents software glitches from initiating or activating unintended acceleration.  In 2011 the U.S. National Highway Traffic Safety Administration (NHTSA) commissioned a team of NASA software engineers to evaluate software of late model year Toyota and Lexus vehicles, alleged to be the cause of  unintended acceleration collision, which caused the death of a passenger in a September 2007. 

___________________________________________________

EPC light came on and can't start the engine,  / EPC warning symbol came on today while driving, / VW Polo EPC  Warning Light came on and lost power.  / Can I drive with EPC light on? / VW Polo no Throttle and EPC light on, / What causes the EPC light to come on? / What does EPC mean on the dashboard? / What is an EPC light?  / What is limp mode,  / What is limp-mode home?, / What is the VW EPC Warning Light, / What is EPC on a Volkswagen? / What does the EPC light mean on a VW, / What does the EPC Warning Light on my dashboard mean, / What does it mean if the EPC warning light comes on in a Volkswagen, / How to Fix EPC Light on a VW,  / What is an EPC light on Volkswagen?, / What Is the VW EPC Warning Light? / What does it mean if the EPC warning light comes on in a Volkswagen?  / What does an EPC light on the dash of a Polo car mean?

The Definitive EPC Guide 2

The Definitive EPC Guide (Continued)

For part ONE Click Here!

Having said that, in my humble opinion, the  EPC circuit with its drive-by-wire circuit and its "Limp-mode home" mode, is a value-add for modern car design; and though frowned upon by many, is a very valuable safety feature. Also bearing in mind that when the communication network is momentarily unavailable and an application that depends on it is unable to communicate, it may trigger the ECU into "Limp-mode home" and set a DTC. Exception errors do occur in  synchronous or asynchronous distributed system, where software entities act as clients or servers or both. So when where 1...n clients are requesting services via a specific protocol from typically one server; the server services the client  but  temporarily blocks its service request and data flow control, whilst other client expects a response from the server.  

If 1 client to n server communication can be established, it would certainly solve the problem but it’s currently not supported. Also remembering that the CAN bus is a serial communication network through which all modules communicate with the ECU via a Central Gateway, some uses FlexRay frames and others Lin bus or CAN, each with a differing topology, some synchronous and others asynchronous. The Central Gateway is responsible for frame or signal mapping function between two communication systems, like from LIN/MOST/CAN/FlexRay to Ethernet transport systems. However ECU gateways often have two or more internal Gateways like the Service Data Unit (SDU) gateway, Layer 3 Tunnelling Protocol (L3TP) gateway and the Signal Gateway needed for frame or signal mapping function between two disparate communication systems.

The best analogy with which to explain the above would be your cell phone. Cell phones are native Global System for Mobiles (GSM) devices with a microprocessor and its support chips, much like the automotive ECU. Cell phones support the Hypertext Transfer Protocol (HTTP) and the Wireless Application Protocol (WAP) for Wi-Fi as well as the Bluetooth communications protocol through a "Gateway" which translates it to a common data stream native to the Cell phone operating system. 

So, while you’re downloading an email and the phone rings and you answer; the email download temporarily stops but will resume when the call is terminated. The same applies to a Bluetooth file transfer which will be interrupted even possibly terminated when a phone call is answered. However, not all services are prone to such interruptions because some services are inherent to the design. For example, when you’re listening to music on your cell phone and you answer an incoming call, the music is temporarily suspended until the call is terminated then the music will resume. 

This function is purposely part of the design whereas exception errors are not and are more prone to happen with asynchronous communication, caused by propagation delays. This is what also happens when the ECU inter communicates with other modules and when the messages are not delivered within a prescribed period of time, can cause the car to go into "Limp-mode home" . So if for some reason the radio that is a non-essential service is hogging the network bus, and you step on the brake which the ECU will undoubtedly detect but the brake light didn't illuminate within the expected response time, which the ECU will also detect, then the car may go into "Limp-mode home" . 

Or you could hit a speed bump in the road at high speed and bounce back onto the road; the thump if hard enough or loud enough to trip a knock sensor would cause the car to go into "Limp-mode home" . Or you could have just done some high rev spirited driving to cause the car to go into "Limp-mode home" . One consolation is that, when the ignition is initially turned on; right before the car is started the ECU does a self-test to verify that all’s well, and if that is the case, the car will start and drive normally. 

However, if the self-test fails, one of the caution lights may remain on. It could be either the EPC light or the Check Engine light or perhaps both, or one or both could be blinking, which is a sure sign that you may have a problem. Once again, a diagnostic scanned would be the most informative way of establishing what the problem is. But I’ve encountered car owner who took their vehicles for diagnostic tests and no errors were flagged, so in some cases may be a futile exercise. 

Having said that, if you are stranded along the road side, the best would be to reset the ECU by removing the battery earth terminal for a minute or two, but make absolutely certain that you have access to your radio / DVD code before  you disconnect. Whatever errors occurred prior to this will be safely stored in the ECU non-volatile memory and may be checked when a diagnostic scanner is available but all stored values will be lost.  The downside of doing this, is that an additional error would be flagged because the battery (+30V) supply was interrupted, and now the ECU has to relearn your driving style.

ECUs are fairly robust and are more-likely-than-not the cause of your EPC problems, though unlikely but not impossible.  The most likely component in my humble opinion that would cause constant and annoying EPC problems would be the wiring harness. Not the actual wires, unless they are frayed and damaged by rubbing against the chassis but rather its edge connectors. 

The ECUs and associated modules each have multi-pin connector that’s tin plated and can become intermittent due to the constant vibration of the car. Copper contacts also oxidizes fairly quickly, so to prevent this from happening, they are tin plated which provides for a low resistance, good contact surface. However when water enters this connection, especially in the presence of a voltage or current flow, the contact normally turns black or corrodes green, impeding continuity hence connectivity. 

A poor vehicle ground connection is another culprit that can intermittently trigger the EPC light without leaving a DTC.  A blown tail light / brake light bulb can also cause the EPC light to turn on without leaving a DTC. Always make sure that the replacement is a 12V 21/5W bulb because the wrong bulb will also cause the EPC to trigger also without leaving a DTC.  A faulty brake-light switch (DPST) is also commonly known for triggering the EPC light and sometimes causes the 10A fuse to blow. 

So, when the brake is applied and the switch throws, its contacts reverse, meaning the normally-open contact closes and the normally-closed contact, open. If there is a delay in the switching time, even as short as .5 of a second, the EPC light will trigger, without leaving a DTC.  A tell-tale sign that the brake-light switch is faulty or that the fuse is blown; is that the Cruise Control appears to be faulty. Since they are both interconnected, the Cruise Control is reliant on a voltage provided through the brake switch. 

DTC can often be intermittent or sporadic so it’s best to ignore those, in preference of repairing those that are permanent. In so doing, they may have interrelations and the sporadic ones may disappear after the permanent errors are fixed. So, it’s best to perform a diagnostic scan, preferably an autoscan with VCDS first, then delete all DTC in the process. Thereafter save this scan and printout a hardcopy to store with the vehicles registration papers. 

The importance of this printout is that it’s a reference to all the modules coding, and if something is inadvertently changed, there would be an unalterable record to refer to. Once done, and as mentioned above, disconnect the battery's negative terminal then disconnect the positive pole and place the battery on charge for about two hour.  Replace the battery by first connecting the positive pole then lastly the negative pole.

 By following this sequence you will prevent damage to the electronics modules strew throughout the car.  At this point, all pre-learnt and all stored values would have been erased from the ECU. Essentially all the control modules would have been completely reset, restarting with a clean slate.  After starting the engine and driving the car for a short distance, check to see if any DTC have been flagged.

Resetting an ECU occasionally is a good thing, because any and all electronic equipment with a microprocessor can experience an unrecoverable error or an internal parity error or fail a cyclic redundancy check and requires a "cold" system restart. Computer  memory (RAM) also experience memory read/write errors, interrupt or address errors and general protection errors; so  when the ECU is reset/cleared, along with its non-volatile memory, the memory (RAM) is also reset.  AUOTSAR and its core partners are trying their utmost to rectify such problems in automotive ECU, but until they do, we will have to contend with EPC problems.

To read the first part... click here.