Thursday, February 7, 2013

VAG


VW DIY

In the not so distant pass, whenever something went wrong in your VW, Polo, Jetta, Passat,  AudiSeat or Skoda,  you could do one of two things. Either  take it to a VW specialist to have it checked out or you could fix it yourself, if you are a hands-on, DIY kind of person. Nowadays the latter option has faded away into obscurity. With the stream of problems VAG cars are having, many of us are in the dark regarding repairs. We make educated guesses, replace parts by substitution, often costing huge amounts of money for repairs and the fault still persists. Below I have out-lined some of the problems I have encountered and with any luck shed some light on the problems you've been having with your VAG car. But before I go any further you may be itching to ask "What is a VAG car?"

Well, VAG stands for Volkswagen-Audi GMBH in Germany, also refers to Volkswagen Aktiengesellschaft or Volkswagen AG for short and Volkswagen-Audi Gelelschaft (Geleslschaft means Association). In essence, it's the same, exact and identical  group. And any car manufactured or sold by them is referred to as a VAG car. Amongst these are, VW, PoloJetta, Passat, Audi, Skoda, Touran, Tauareg, Beetle, Tiguan, Golf, PorscheAmrok,  RabbitBentley, BugattiBora, Phaeton, Vento, Kombi, Transporter,  Lupo and the  Lamborghini, each one with a different engine with varying capacities with obscure three letter abbreviations like, BBX, AAF, AEX and APE amongst many others. However many of them have the same or similar Electronics Bosch Motronic system hardware with software ranging from ME 5.x to ME 7.x, with several support modules in common, networked to the OBD II / OBD2 (On-Board Diagnostic System ver. 2) or Can-Bus (Controller Area Network) standard.

The VW Polo 2007 with new Bluemotion technology can switch its engine off
when it comes to a halt, yet plagued by the legacy VW EPC light problem.

The idea behind this is so that only the  Volkswagen dealership technician are supposed to do the servicing and perform repairs to your car. The VW car manuals specifically discourages anyone other than qualified or trained mechanics /auto-electricians and technicians or mechanicians to perform servicing, especially changing codes and performing readiness testUnder the OBD II and Can-Bus standard, an ECU (Engine Control unit) interfaces with various other modules fitted in the car and controls and manages all sub-circuits. For example, Central Electronics Module, ABS module, Temperature Control Module, Speed-o-cruise Module, etc... When one of these modules detects a fault with one of its components, it registers a error in the non-volatile memory. Lets say you have a front wiper motor problem and it just wont work, but the fuses are OK. Even if you suspect the wiper motor as faulty and it actually is faulty and you replace it, the new wiper motor still wont work after its been replaced and switched on. You first have to clear the error or errors  from non-volatile memory with a diagnostic tool. Then and only then will it work.  

I've had the same results with my power steering which just wouldn't work after some work was done to my car and in the process the Power Steering Motor was disconnected. When it was reconnected the power steering was very stiff and difficult to steer. After going through the entire process of checking and back-tracking it still didn't work. Eventually, when the diagnostic tester was plugged in, two errors codes showed up. The first indicating that the +30V supply had dropped to an unreliable level and the second a power steering error. The first was because the battery was disconnected and the second was because the power steering plug was disconnected. After erasing the two error codes from the non-volatile memory, the power steering work perfectly normal.

I can assuredly say that I am not alone or rather that my car trouble is not unique, neither am I the only VW owner having car trouble (see previous blogs).  It appears that my 2007 Polo Classic Highline shares most of the problems listed below with my fellow VW owners. There are probably hundreds if not thousands of other  VAG car owners experiencing the same issues with their cars as I am experiencing with mine. Here are just a few of the problems that my fellow VW owners shared with me :-

"VW polo dashboard brake light stays on" / "EPC instrument fault indication light is on" / "VW polo warning lights on dashboard" / "VW  polo classic is showing epc light, starting and dying" / "polo dashboard controls" /  "VW  polo warning lights off power steering" / "warning light on dashboard" / 2007 volkswagen polo problems" / "audi electronic power control indicator" / "won't rev" / "VW Polo EPC Warning Light" / "golf mk4 dashboard warning lights" / "epc instrument fault indication" / "VW  door key problem" / "VW  polo accelerator position sensor (g79)" VW throttle body sensors"

NB! Fellow VW drivers found this site to be helpful and was interested in checking out the following sites as well.

expowpphotojanicontroversy365nerdytoyslovelifelovehealthsightsofcapetownsowpboxelectroniquesblogspot-atphoto-magixgodssitesglycomixarth-ritisforex-bidfoodsofthecapelanguagesbarrier, pimpyocare-gimos.

Should you find this blog informative or even help full in the very least, please recommend it to others and click on the g+ tag below. Thanks.





Wednesday, January 30, 2013

VW ELECTRONIC POWER


EPC LIGHT EXPLAINED

As I mentioned before in my older blogs, the new generation of VW cars are designed to turn on an EPC Light (not check engine light) so that only the  Volkswagen dealership service technician or technicians are supposed to do any an all servicing and repairs.  The VW workshop manuals specifically discourages anyone other than a qualified or trained mechanics / auto-electrician and automotive technician to perform servicing, especially changing codes and performing readiness test.  This is because  incorrectly set readiness and adaptation settings can completely disable your car and virtually render it useless. To repair it would then cost a small fortune.

CHECK ENGINE LIGHT

An earlier blog, covers some late model VAG cars with fuel injection and electronically controlled throttle body instead of the traditional accelerator cable controlling the throttle valve. It is called Drive-by-wire or DBW for short. When the Engine Control Unit -ECU, which invariable is a computer in its own right detects a fault  Diagnostic Trouble Code - DTC  in the Drive-by-wire system, it registers a fault Diagnostic Trouble Code - DTC in its non volatile memory and turns on the EPC light, disables the accelerator and throttle bodylimit the engine to a maximum of 1500 rpm -"Limp Mode".  This would be sufficient power to "Limp Mode" the car to a service centre without causing further damage to the car or unduly polluting the air should the fault cause it to smoke. This is a safety precaution and can be equated with, what would happen if  an accelerator cable got stuck in the downward position. Disaster could follow. The Engine Control Unit -ECU collects faults Diagnostic Trouble Code - DTC from all senders and stores an internal list, which is only visible with a diagnostic tester. Diagnostic Trouble Code - DTC can range from excessive emissions to - intermittent air bag connections, from brake light failure to - depleted brake pads, from interior ultrasonic failure to - immobilizer problems to even disconnecting the battery. Each of these faults generates codes, some of which can be viewed in future blogs.

Should the Volkswagen Engine Control Unit -ECU  considered a Diagnostic Trouble Code - DTC to be so serious that it could possibly do harm to the engine or the environment, it will inhibit the throttle function and limit the engine revs or even disable starting or idling completely.  Unfortunately the only way to repair such problems, is to connect the  Volkswagen Golf,  Jetta, VW Polo, or Volkswagen Beetle, to a dignostic tester through its CAN-Bus / OBD2 / OBDII port and view  Diagnostic Trouble Code - DTC  if any and  Diagnostic Trouble Codes, clear them from memory and perform corrective procedures.  Below is an overview of the Electronic Power Control Circuit - EPC and how the Drive-by-wire system operates.
The basic operation of  the Electronic Power Control (EPC) Schematic showing inputs
from drive-train sensors and output signals to drive-train actuators.

Other INput senders could result in similar problems. For example - the Oxygen Sensor could detect that the exhaust fumes carbon mixture exceeds the prescribed level which is toxic to  the atmosphere and the environment. It could disable driving of the vehicle by enabling the Electronic Power Control Circuit - (EPC), turning on the EPC warning light or even disable starting not allowing the car to idle. This could be due to a dead plug causing the idling to be erratic and not burning up all the fuel. This un-burnt fuel will invariably change the exhaust fumes composition which triggered the Catalytic Converter and Oxygen Sensor in the first place.

Like wise, when the brake light bulbs blow or the fuse to the brake circuit blows, an INput signal from the brake light sender could also activate the Electronic Power Control Circuit - (EPC), turning on the EPC warning light causing the car to go into "Limp Mode" because driving a car on a public road without brake lights is an accident just waiting to happen. In fact the Engine Control Unit (ECU) looks upon this car as non-roadworthy as a safety procedure. In a previous blog I described an Electronic Power Control Circuit - (EPC)which switches on the EPC light problem caused by an INput  signal from one of the knock sensors with the same results as above. Other senders INputs that can cause similar problems are:-

The Engine Speed Sender G28 situated at the flywheel.
The Hall Sender G40 situated at camshaft pulley
The Hot Air Mass Meter G70 and intake Air Temperature sender G42 situated near intake manifold.
The Lambda probe G130 situated upstream of catalytic converter
The Lambda probe G39  before catalyst converter
The Knock sensor I - G61 below intake manifold
The Knock sensor II - G66 below intake manifold
The Accelerator Position Senders G79 and G185 embedded in accelerator pedal (EPC Problem)
The Clutch pedal switch F36 situated in the drivers foot well.
The Brake light switch F and brake light switch F47 situated in the drivers foot well.
The Throttle control valve / motor drive assembly  J338 
The Angle Senders  G187 and G188 situated inside throttle body.
The Fuel Pressure Sender -G247

NB! VAG car owners who found this site to be helpful 
were interested in the following sites as well.

expowpepc warning light, service engine light, photojaniservice engine light on, service engine light on,  controversy365check engine light service, epc car light, epc in car, nerdytoysepc light on car, what is epc on a car,  lovelifelovehealthcheck engine codes, check engine light codes, sightsofcapetownwhat does epc mean, what does epc mean in a car,  sowpboxwhat does epc mean on a car, check engine light,  electroniquescheck engine light flashing, check engine light on,  blogspot-atblinking check engine light, flashing check engine light,  photo-magixservice engine soon, service engine soon light,  godssites,  what does check engine light mean,  glycomix,  arth-ritis,  forex-bid,  foodsofthecapeengine warning light, languagesbarrier,   yellow engine light,  pimpyocarwhat does the check engine light mean,  e-gimos.

A huge Italian styled white house with one of the world's fastest sports cars, a Dagger GT standing in front of it.
MAKE REAL MONEY ONLINE WITH FOREX

Sunday, January 27, 2013

POWER CONTROL


ELECTRONIC POWER CONTROL EXPLAINED

As I mentioned in a previous, blog German Automotive Technology is really, really cool. German car design and automotive technology is currently at the forefront of going green, with the result that all other motor manufacturers are turning green with envy. Pardon the pun. German car design technology doesn't flaunt the colour green as eco-friendly but rather blue. 

Mercedes is pushing Blue Efficiency as their future technology and VW is flaunting Bluemotion as their new technology.  Polo de Volkswagen Bluemotion technology started out with the 2007 Polo (not my 2007 Polo Classic) and may be seen in some of their new vehicles. It's futuristic in the sense that it saves fuel. It saves all the fuel that would have been used, if the car was allowed to idle. Blue Efficiency and Bluemotion fuel technology doesn't allow the car's engine to idle, so when you start the car, it doesn't actually idle but the dashboard lights indicate that the engine has started. Logically there is no engine noise since there are no revs. The moment the car is engaged into gear and you remove your foot from the brake pedal, the engine starts instantly and pulls away as if it has been idling all the time. Exactly the same happens when coming to a compete stop at a traffic light or stop street. The engine switches off when the car comes to a halt, and remains off whiles you foot keeps the brake pedal depressed. However, the moment the pedal is released, the engine starts and the car moves off as if the engine was never switched off. There is no delay.

Having  said that, can you contemplate or just imagine the complexity of the electronics, both hardware and software employed in Bluemotion Technology, considering that many of the service agents are even stymied by the current German technology used in cars prior to 2008. The EPC on Volkswagen, Audi, Skoda, is just one of them. Central locking is another, ABS is a third and airbag a fourth. Intermittent reverse light whilst driving a fifth, brake light is on, blowing brake light fuses is a sixth and the list goes on. The repair and service charges for the non-Blue motion vehicles are already over the top so what can we expect to pay for repairs to Bluemotion technology vehicles. Besides who is going to repair them? Currently service agents are trowing spare parts at each electronic problem hoping that it would solve the problem but in most cases doesn't solve the problem.

Anyway, it appears that quite a few visitors who viewed my Electronic Power Control EPC solution blog have no idea what a potentiometer (sender)  is, so let me explain and use the VW Polo accelerator pedal [accelerator position sensor (G79 & G185)] as a basis for understanding. Below is a picture of a potentiometer marked "A" that may be used in an electronic circuit. It specific one could be used as a volume control in an amplifier, or a sensitivity control on a disco strobe or a brightness control for a lamp dimmer. The uses for potentiometers are endless and has been used in cars for quite some time.

An overview of the  Electronic Power Control Circuit - EPC  in Volkswagen, Audi, Skoda.

The accelerator sender marked B and the throttle body housing marked C as seen above each have a gang potentiometer (meaning more than one potemtiometer in the same housing)  VW calls these both these potentiometers senders since they provide input to the ECU - Engine control Unit.  The ECU controls  the Drive-by-wire and any problems with it causes the car to go into "Limp Mode" resulting in the EPC warning light or other dashboard lights to come  on. Have a look at Electronic Power as to how the entire accelerator throttle  circuit is controlled and interfaces with the OBD2 /OBD II and Can Bus network.



Wednesday, January 9, 2013

DRIVE BY WIRE


VW - DRIVE BY WIRE (Drive-by-Wire)

If you arrived on the VW Polo website because you searched for  Drive by Wire (DBW), EPC, or EPC light or engine won't rev, Steer-by-Wire, or limp mode,  then you have certainly arrived at the right place. There are several definitions for ECP, the first of which will be explained, is Electronic Parts Catalog (EPC).

EPC stands for Electronic Parts Catalogue (EPC) and all Audi, Volkswagen,  Skoda and SEAT parts are listed in ETKA V7.2 EPC (Electronic Parts Catalogue). This catalogue is purchasable online and downloadable but the file is huge. Companies like Mercedes Benz, Toyota,  Enigma, Attrakt among many, many others host computer based electronic catalogs of the individual auto parts and accessories that make up their engines, cars, tractors, specialized machinery and farming equipment etc. Restated, an EPC is a catalogue in electronic format much like CVS data or a database file or similar, that can be downloaded or is accessible online.

Then there is the second type of EPC - Electronic Parts Catalog (EPC) software. MultiCat and Msys.EPC are companies that specialize in the software that can display an exploded view of an assembled device. For example, the exploded view of an engine, or gearbox, or cylinder head, showing the individual bolts and nuts, flanges, hoses and brackets, etc. and their component part numbers.

Thirdly, there is also the Electronics Parts Catalog (EPC) which is an electronic list or database of semiconductor components, from diodes to transistors to integrated circuits to thyristors, etc... This EPC is often called and equivalents book or catalog and hosts the specifications of semiconductors from several manufacturers. A typical EPC is the RS Electronic Components and Tools Database. This EPC doubles up as the third type of EPC which is the Electronic Product Code. Component Product Codes look like,  1N4148 or BC337, MCP2515, TYN812RG, etc... for electronic components.

However, there are many more EPC definitions, some of them can be found at the end of this blog. I could explain all of them individually but none has any relevance to the subject at hand, viz EPC - Drive by Wire. Drive-by-Wire also know as  DbW, Steer-by-Wire "x-by-wire" or simply "by-wire".


DRIVE BY WIRE

And finally, the Electronic Power Control (EPC) that freaks out almost each and every VW 1.6 PoloAudi TT, Skoda, SEAT and  Golf TDI, owner. Most vehicles with Drive by Wire [Drive-by-Wire (throttle control)] usually have a Electronic Power Control (EPC) indicator lights on its dashboard which lights up when  there's a problem with the Drive-by-Wire system. This would involve the two accelerator pedal sensors G79 and G185 and in some cases the two sensors G187, G188 inside throttle control valve body - control actuator. [As discussed in my previous blogs] When the engine idles, neither the Throttle Valve Angle Sensor nor the Accelerator Pedal Position Sensor are monitored for faults by the ECU, as suchthe engine does not respond to accelerator input but will limit engine to 1200 RPM.

The  basic components that constitute the Electronic Power Control (EPC) circuit. 
There is no throttle cable involved, because its an electronic throttle control.
The Electronic Power Control (EPC) circuitry consists of EPC light, Accelerator Pedal, Throttle Control Valve,  DBW  (no throttle cable,) Injectors and the Engine Control Unit (ECU). Have a look at the diagram above. The inputs to the ECU is marked green and the outputs from the ECU is marked blue.  Check that the brake light bulbs are OK, if not check the brake fuses. There are other inputs to the ECU from numerous other sensors or units for example the Automatic Gearbox Control unit, Cruise control unit, Air conditioning unit, Lambda Regulation unit, Knock Sensor units, Alternator, Engine Speed Sensor unit, ABS and the  Power-assisted steering unit to mention but  a few. 

The CAN-Bus bidirectional connection is marked in orange. Some of the other inputs like Knock sensors and Lambda regulator and Engine Speed Sensor unit can also cause the EPC light to come on. If the Engine Speed Sensor unit is responsible, it will reset itself after a while and if the Lambda regulation is faulty the vehicle will smoke and turn on both MIL and EPC lights, but if the Drive-by-Wire - DBW (not drive by cable) system is faulty then only the EPC light will be on.


Both the accelerator sensors and the throttle valve sensors work on the same principle since all 4 of them are potentiometers. The input voltage is 5 Volts and the increments are in millivolts implying that there is an  acceleration range of between 0 and 5000.  Throttle valve angle  sensor 1 and Throttle valve angle sensor 2Accelerator position sensor 1 and Accelerator position sensor 2 sliders makes contact with the resistive track and outputs the appropriate voltage level to the ECU. These resistive tracks are prone to go faulty since they are gold plated contacts running on gold plated copper tracks etched on a PCB. Over time the contacts wears right through the gold and copper plating, only making contact with the bakelite or fibreglass substrate. This type of potentiometers are less reliable than ceramic thick-film potentiometers.

When the EPC warning light goes on and your acceleration goes limp and the engine won't rev-up there is an easy cure but there may be exceptions. Get the car home even if it means driving really slowly in "Limp Mode". Once home, disconnect the battery for about 15 minutes or so, but not more than 20 minutes then reconnect. NB! do not disconnect the Live terminal, disconnect the Earth terminal. If the battery is disconnected for more than 20 mins you will lose your radio settings since the radio also participates in volatile and non-volatile memory of  the CAN-Bus

Reconnect the battery but make certain that the ignition is off. Once this is done, turn on the ignition so that the dashboard lights go on but do not start your car and DO NOT touch your accelerator pedal. After about 5 minutes the throttle body will aligns itself. After 10 minutes turn off the ignition, wait for 2 mins then start the car and let it idle for abut 2 minutes as well. By now, the EPC warning light should be off and the engine will rev as normal.You may have to to this twice. If this worked for you, please do give me some feedback with a comment.


VW Airbag diagnostics 

VW Instruments - Immobilizer

   
DON'T FORGET to VISIT

VW, SEAT SKODA and AUDI OWNERS  found the following sites interesting.  
expowpphotojanicontroversy365nerdytoyslovelifelovehealthsightsofcapetownsowpboxelectroniquesblogspot-atphoto-magixgodssitesglycomix, arth-ritis, forex-bidfoodsofthecapelanguagesbarrier, pimpyocare-gimos.


COME MORE EPC DEFINITIONS

EPC - Engineering, Procurement & Contracting, 
EPC - Engineering, Plant  Construction,
EPC - European Paralympic Committee,
EPC - Electronic Product Code, 
EPC - Event Promotional Council,
EPC - Energy Performance Certificate,
EPC - Engineering, Procurement and Construction, 
EPC - Event-driven Process Chain, 
EPC - Evolved Packet Core,
EPC - European Patent Convention,
EPC - Eastern Provincial Council, 
EPC - Electronic Poetry Center, 
EPC - European Policy Centre,
EPC - European Political Community, 
EPC - European Political Cooperation, 
EPC - Evangelical Presbyterian Church 
EPC - Export Promotion Council, 
EPC - Electricity Plant Controller, 
EPC - ElectroPlating Cathode,
EPC - European Payments Council,
EPC - Electronic Packet Collision,
EPC - Electrical Professionals Council,
Etc...,