Friday, May 10, 2013

VW ABS CODING



VOLKSWAGEN ABS DIAGNOSTICS

Using a code reader or  diagnostic tester to view your VW Polo ECU data is quite a treat and is also really cool. A view of the data just exudes the growth of motor vehicle technology in general and it is quite humbling if you are electronically minded and quite intimidating if you are mechanically minded.  However there is often the temptation to change a number or something, just to see what happens to your Volkswagen. If you are one of those people who just did that, I bet you have a wistful regret, wishing that you never did so in the first place because you got yourself a "01044 control module incorrectly coded error." Or perhaps you  swapped a 1996 VR6 engine into a 2007 MkV GTI chassis and got a "01044 control module incorrectly coded error." Or you had your car serviced and the ABS and ESP light stays on in the instrument panel and showing up as a "01044 control module incorrectly coded error."  Or you cleared that nagging airbag light on your VW Beetle, only to get a "01044 control module incorrectly coded error."

Control modules codings are normally NOT interchangeable since virtually every model among the numerous versions of  VW's  each have a different ABS/ESP modulePower Assisted Steerin Module, Climate control ModuleInstrument Module, Immobilizer Module and Engine Control Module and so many other modules. Taking this into consideration,  it is more than  obvious that one should NEVER copy coding from a different model VW, AUDI, SKODA or SEAT and paste it into your own VolkswagenAUDI, SKODA or SEAT, unless you write down your original modules original coding so that you can revert back to it later, should things appear to go pear shaped. 

However if the two VW, AUDI, SKODA, or SEAT are the same in every respect, then  their module codings will be identical and therefore perfectly fine to use. Be particular about the module suffix since different suffixes signify different software versions which may not be compatible to your VAG car. Virtually each module that appears identical but has different letter suffixes will invariable have a different coding. So the rule is same car, same module, same module number, same module suffice, same coding. Disregarding this could incapacitate your car and cost you a huge amount of money.

Every Control module coding is stored as an onboard binary number, which in essence is the binary sum of the features for that specific module. Whereas the ECU also stores an onboard binary number which is the binary sum of all the Control Modules fitted in the car. This binary sum is called the checksum and any incorrectly coded  module will result in an erroneous checksum. If this is the case, the erroneous checksum is compared to a reference checksum also stored in the ECU module and any discrepancy could incapacitate your Volkswagen completely or present you with some peculiarities and error codes to match. Like the notorius 01044 control module incorrectly coded Checksum verification was adopted by BOSCH Motronic ECUs to validate its EPROM's stored data. Having said that, it is wise not to change the coding or replace any control modules in your VW AUDI, SKODA or SEAT unless you are au fait with binary and hexadecimal number systems

Below, is a list of VW ABS controllers and their respective coding which vary from  'ABS FRONT MK60 0101' to  'ABS 8.0 front H03 0002' to 'ABS 8.0 front H05 0002' to 'ABS 5.7 FRONT V20' to 'ABS 5.7 FRONT V30 ' to 'ABS/ASR 5.7 FRONT V20' to 'ABS 5.7 FRONT V00' to 'ESP 8.0 front H03 0001' to 'MABS 8.0 front  H04 0002' to 'ESP 8.0 front H03 0001' to 'ABS 8.0 front H03 0002' to mention but a few. Several VW, AUDI, SKODA and SEAT owners and mechanics are constantly searching the Internet for ABS module coding and hopefully this information may help them to get their Volkswagens, Skodas, Seats,  Audis and other VAG cars up and running once again.

VW POLO 6Q0 907 379 AC ABS Pump

VW Polo 9N
Address 03: ABS Brakes
Controller: 6Q0 907 379 AC
Component: ABS 8.0 front H03 0002
Coding: 0000145

ALTERNATIVE ABS MODULE CODING
NB! These are the codings I currently have but are certainly not the only ones use by Volkswagen, SEAT, Skoda and Audi. As I get them I will update this list.

6Q0 907 379    - Coding:  00036 or 00044
6Q0 907 379 AA - Coding: 0000005 or 0000008
6Q0 907 379 AB - Coding: 0000005 or 0000008
6Q0 907 379 AC - Coding: 0000145 or 0000142

6Q0 907 379 AF - Coding: 0002061 or 0002079 or 0002082 or 0002085 or 0002103 or 0002115 or 0002118 or 0002122 or 0002136 or 0002145 or 0002175 or 0002181 or 0002190 or 0002193 or 0002199 or 0002202
As can be seen above, AF suffix has the whole gamut of codings and each should be tried before throwing in the towel.

6Q0 907 379 AG - Coding: 0002202 or 0002229 or 0002238
6Q0 907 379 AH - Coding: 0000299 or 0000284
6Q0 907 379 AQ - Coding: 0002356
6Q0 907 379 AS - Coding: 0002347 or 0002368 or 0002368 or 0002491
6Q0 907 379 AT - Coding: 0000269
6Q0 907 379 BC - Coding: 0002136 or 0002098
6Q0 907 379 C  - Coding: 00044
6Q0 907 379 D  - Coding: 00124 or 00188
6Q0 907 379 E  - Coding: 0001097
6Q0 907 379 G  - Coding: 00044 or 00045
6Q0 907 379 H  - Coding: 00188
6Q0 907 379 L  - Coding: 0001097
6Q0 907 379 M  - Coding: 0000000
6Q0 907 379 R  - Coding: 0000008
6Q0 907 379 T  - Coding: 0000281 or 0000296 or 0000299

Make some quick money
Eat as much as you like at Alfonso's Wedding
A Classic Wedding Cake 

Friday, May 3, 2013

VW POLO DIAGNOSTICS




After I completed all the minor repairs (as can be seen in my previous blog) to my VW Polo 2.0L Highline she finally went for her 90 000 kms service. But hardly did I get her back when I heard a very soft and occasional "ting, ting, ting" coming from the right front wheel. The sound was difficult to identify at first, not even the auto service technicians at the center could hear it. I found that the wheel had a few millimeters of sideways play when I jacked-up the VW Polo. This prompted me to check all the nuts & bolts and I found the nut on the tie-rod end to be loose. After tightening it, the sideways play was cured. However, it didn't cure the soft, occasional and irritating  "ting, ting, ting."  Twice thereafter I had the wheel off but found nothing out of the ordinary. Anyway I suspect its the right right hand side CV joint that is starting to go but it kind seems strange that a CV joint should give up the ghost round about 90 000 kms, its just way too early.

VW Amarok left hand drive double cab in snow white.
The tough smart VW Amarok Double Cab.
The 2.0L VW Polo right hand side drive shaft is very different from that of its siblings, it is much thicker and the spline that the hub slides onto, is much coarser that any other VW Polo. This drive shaft is an agents only item and its not cheap and to replace it by substitution to get rid of the occasional "ting" is a bit extravagant. My VW Polo is a very different beast from the rest of the VW Polo range and finding information for it is quite difficult. It seems every service centre has all the other manuals except that of the VW Polo Classic 2.0L highline.

VW DIAGNOSTICS
For starters it has the following odd ball ECU controlling an odd ball BBX engine rated at 84KW and 116HP.
Address 01:   Engine
Controller ID 06A 906 032 PB 
Sotware Coding Coding 00071

ENGINE TYPES:
Essentially Bxx implies VW Polo engines manufactured after 2005, whereas Axx implies engines manufactured prior to 2005 or rather between 2001 and 2005. The following  engines range from 1.2L to 1.4L to 1.6L to 1.8L to 1.9L and 2.0L and include diesel engines. BMD, BBM, BME, BZG, BKY, BUD, BLM,  BBZ, BNM, BWB, BMS, BNV, BAH, BTS, BJX,  BBU, BMT, BLT, BBX,

The following  list of Axx engines also range from 1.2L to 1.4L to 1.6L to 1.8L and 1.9L and include diesel engines, AWY, AZQ, AUA, AXU, AUB, AMF, ASY, ATD, AXR, ASZ. However the Axx, Bxx rule isn't hard and fast or cast on stone. There are VW Polo vehicles manufactured prior to 2005 with BMD, BME, BBY, BKY, BBZ, BAY,BLT engines fitted and there are some manufactured after 2005, fitted with AXU,ATD, ASY, AXR, ASZ engines.

Concept cars by Volkswagen
My 2.0L Volkswagen Polo  ECU's isn't only used in 2.0L Golf,  Jetta and VW Polo but also in 1.8T like the Seat Ibiza Cupra, Seat Leon, and the Seat Toledo Cupra with ME7.5.10 software.

2.0L GOLF / JETTA - ECU or Engine Management System
AWD 06A 906 032 CL 2001
AWD 06A 906 032 CM 2001

AZG 06A 906 032 DS 2001 (manual)
AWW 06A 906 032 DL 2001 (manual)
AZG 06A 906 032 FN 2002 (manual)
AVH 06A 906 032 BP 2001 (manual)
AVH 06A 906 032 FQ 2002 (manual)
AVH 06A 906 032 MC 2003 (manual)
BEV 06A 906 032 MT 2004 (manual)
BBW 06A 906 032 PE 2004 (manual)
AWP 06A 906 032 HS 2002 (manual) 
AWP 06A 906 032 LP 2002 (manual) 
AWP 06A 906 032 NK 2002 (manual) 
AWP 06A 906 032 SK 2002 (manual) 
AWP 06A 906 032 RN (6spd manual)
AWP 06A 906 032 SM (6spd manual)
AZL 06A 906 032 NH
AZL 06A 906 032 MN
AZL 06A 906 032 NJ

AZG 06A 906 032 DT 2001 (automatic)
AVH 06A 906 032 BQ 2001 (automatic)
AWW 06A 906 032 DM  2001 (automatic)
AWW 06A 906 032 GH 2001 (automatic)
AVH 06A 906 032 FR 2002 (automatic)
AZG 06A 906 032 FP 2002 (automatic)
AVH 06A 906 032 MD 2003 (automatic)
BEV 06A 906 032 NA 2004 (automatic)
BBW 06A 906 032 PD 2004 (automatic)
AWP 06A 906 032 LQ (5spd automatic)
AWP 06A 906 032 NL (5spd automatic)
AWP 06A 906 032 SL (5spd automatic)

VW DIAGNOSTICS CONT.
My 2007 VW Polo Classic 2.0L Highline is an 9N4 with a JHF 5 speed odd ball manual transmission with odd ball gear ratios and also has a obscure Immobilizer module (6Q0 920 825 C) which doubles up as the Instruments Module. This is easily visible because of the software coding. There are several dozen of other Instrument Modules none of which are compatible to the 2007 VW Polo Classic 2.0L Highline.

Address 25:             Immobilizer  
Controller ID         6Q0 920 825 C
Component         IMMOBILIZER VDO V06
Sotware Coding 00141

Address 17:              Instruments 
Controller ID            6Q0 920 825 C
Component              KOMBIINSTRUMENT VDO V06 
Software Coding 00141

VW DIAGNOSTICS CONT.
The following VW 9N and 6N3 Instrument controllers have various coding, which is subject to other on-board equipment. The  software versions in their 93c86 EEPROM  range from V2 to V17 and appears incompatible to 6Q0 920 825 C. As can be seen below, only the letter suffix changes but the software is somewhat different.

Controller: 6Q0 920 825 E / Coding: 01144  =   VW Polo 9N1  = software VDO V06
Controller: 6Q0 920 825 F / Coding: 01132  =   VW Polo 9N = software VDO V05
Controller: 6Q0 920 825 G / Coding: 01132  =   VW Polo 9N = software  VDO V03 
Controller: 6Q0 920 825 J / Coding: 01142   =   VW Polo 9N3  = software VDO V06
Controller: 6Q0 920 825 H / Coding: 01141  =   VW Polo 9N1  = software VDO V06
Controller: 6Q0 920 825 K / Coding: 01148  =   VW Polo 9N = software VDO V05


TRANSMISSION TYPES:
The following  list of  5 speed manual transmissions are fitted in the  1.8T Mk4 Golf, 1.8T Beetle, 2.0L Beetle, 1.8T Golf, 1.8T Jetta IV, Jetta IV 2.0L, Golf IV 2.0L,  Jetta 1.8L, Jetta 1.9L, Jetta  2.0L, 2.0L Golf VR6, non of which has the odd ball JHF transmission used in the 2007 VW Polo Classic 2.0L Highline.
CDN, DZC, DZQ, EBD, EBJ, EBP, EBQ,  EGQ, EGR, EHA, EHC,   EGT,  EKG, EKH, EMS, EMT, ENJ, EZK, FBY, FBV, FBW, FCF,  EGF, EWW,  EUH, GQQ,  JCR, JDM, JDQ.

If you have a VW Polo Classic 2.0L Highline, you may post your VW Diagnostics report below.  


Trade Forex and make enough cash
to buy a Volkswagen
Beautiful Women in wedding Gowns.

Saturday, April 20, 2013

VW ERROR CODES


VOLKSWAGEN ERROR CODES

My VW Polo Classic 2.0L Highline has been acting-up  more and more as the date for  her 90 000Km  service approached.   The Volkswagen Auto suddenly became very heavy on fuel and she started to smoke. It wasn't grey smoke, which would imply the VW Polo was burning oil but rather black smoke which is the tell tale sign that the VW Polo is burning gasoline. I normally do about 6 liters per 100kms but with the last tank of fuel I got something like 9 litres per 100km. With the latest high price of fuel in South Africa, I just had to investigate.  The EPC light problem also returned, which was triggered by the ECU that  placed the Polo into "Limp Mode" once again.  


Rusty water residue still on the engine cover above the VW logo.
However that's not all. My VW  Polo's interior overhead lights above the rear view mirror and sun visor courtesy lights have all stopped working when I open the doors but works perfectly when switched on manually. The  hooter also just gave up the ghost, but  the click of the micro switch in the steering wheel is very audible when I press it.  One of my VW headlight also seems to be intermittent and it appears that my oil level sensor also does'nt work either. My VW air conditioner stopped working  and my VW left tail bulb fused again and the reverse light is intermittent. I was told that it goes on or flickers whilst I'm driving.   But worst of all my VW Polo overheated whilst driving in peak hour traffic and the fans didn't even come on. When I pulled the bonnet release, the little lead ball at the end of the cable snapped off. Consolation I noticed the steam coming out from under the bonnet before the heat gauge was at 100 degrees. To add insult to injury, normally at approx 20 kph all the doors of VW das auto locks, but lately the front passenger side door unlocks itself mere seconds after it locks. This is a security risk and with all the other problems I've been experiencing, I just had to connect the VW to a diagnostic tester. This turned out to be a weekend job when the following Error Codes popped up.

Chassis Type: 9N3 - VW Polo
Scan: 01,02,03,08,09,15,17,19,37,44,46,56,69

Address 01 -------------------------------------
Controller: 06A 906 032 PB
Component: 2.0l ME7.5.10 0305
Coding: 00071
Shop #: WSC 01120
VIN: AAV ZZZ 9NZ 7Uxxxxxx  / VWZ7Z0G5248478
Readiness: 0000 0000

SOME ERROR CODES:-

VW, Polo Highline, Polo 1.9 TDi, Volkswagen beetles, Jetta, VW Polo cross, Passat, Polo GTi, Bora, Volkswagen bluemotion, Polo Classic,   Polo 1.9 tdi,  VW Polo blue motion,  Cross Polo, VW Golf, Beetle, Audi, VW blue motion,  Skoda, VW Touran, VW Touareg,  VW Tiguan, VW Amrok, VW Rabbit, VW Caddy, VW Phaeton, VW Vento, VW Kombi, VW Transporter, VW Lupo and VW Vivo - Error Codes

VW Error code 16716  P0332 - Knock Sensor 2 (G66): Signal too Low - Intermittent 
VW Error code 17511  P1103 - Oxygen (Lambda) Sensor Heating: B1 S1: Performance too Low
VW Error code 17796  P1388 - Control Module Malfunction - DBW Throttle Monitoring 
VW Error code 18010  P1602 - Power Supply (B+) terminal 30 Low Voltage
VW Error code 18041  P1633 - Accelerator Position Sensor 2 (G185): Signal too Low
VW Error code 18047  P1639 - Accelerator Position Sensor 1/2 (G79/G185): Implausible Signal
VW Error code 18048  P1640 - Internal Control Module: EEPROM Error
VW Error code 18090  P1682 - Powertrain Data Bus: Implausible Message from ABS Controller
VW Error code 18104  P1696 - Powertrain Data Bus: Implausible Message from Steering Column Controller


Turns our that ECU CAN bus edge connectors were corroded which solved P0332, P1682, and P1689The P1602 is not really considered an error since it will always be present in the ECU if or when the Battery was disconnected. P1388, P1633 and P1639 are related to accelerator pedal sensors and once the pedal is replaced that problem will be solved, other than that, the VW Polo drives perfectly normal. The Internal Control Module, error P1640 however is going to take a bit longer to solve since it appears that several of my VW module's coding values has somehow changed on their own. But most of all I'm glad I solved the black smoke problem. I found that the wire of  the Oxygen sensor was burnt onto the exhaust pipe and shorted out the sensor. So I'm back to 6 litres per 100Km.

Radiator relay controller destined to be replaced since neither of the fans operate.

There were no errors on the ECU for the overheating radiator  and when I removed the bonnet release cable I saw that the bonnet open sensor / switch wire was broken off. I traced the heating problem to the  relay (picture above) and while I was under the engine I noticed that the Air Conditioner compressor wires had frayed and were dangling loose.

Before and after - Air Conditioner Compressor wires frayed and somehow broke off 
Before and after - Bonnet open/close micro-switch/sensor  with wires reattached.
Oil level sensor wires hardened and became brittle resulting in no electrical connection
 I cut off the hardened pieces of wire, tinned them with solder and reconnected the wires to the oil sensor with electrical block connectors since the terminals initially used by VW didn't seem to last very long. The block connector appears to makes a much better connection.

The plastic insulators on the spade terminal couldn't withstand the heat of the cool blue bulbs.
VW VAG - Volkswagen error codes and VW Electronic Module diagnostics will be dealt with in subsequent blogs, starting with Engine Modules for the Polo 9N , then ABS Modules then Airbag Modules.