Overactive Check Engine Light

AUTOMOTIVE RELIABILITY  

All automotive manufacturers have reliability issues with some or certain of their vehicles and Volkswagen is no exception even though it is one of the largest car manufacturer in the world. Globally the masses buy cars in general based on its looks (aesthetics), price, performance and reliability but not necessarily in that order.

In my opinion, reliability play a major role in decision making and should always be considered first. Hence, the question that begs to be asked is, "What's the use of owning a smart looking car with better than average performance that you acquired at a very attractive price but is as unreliable as a career politician". 

Understandably car manufacturers at times produce lemons (The Monday Car) or unknowingly fit a substandard part to some of the vehicles which only becomes apparent when it starts to fail in the field, necessitating a recalls. However, often times these troublesome parts slip through the cracks and fail infrequent enough and disparate enough as not to alert car owners to this pending problem and that is replaceable under recall. 

As a consequence car owners foot the repair bill for something that may never have been necessary to fix or replace if the manufacturer did their due diligence by adequately testing these parts before use. Any and all parts not tress tested or burn-in tested invariably fails and these failing parts then becomes known as Common Problems that plague the car owners.

Case in point, the Volkswagen Jetta 2006 - 2019 appears to have the most issues — aka Common Problems — necessitating seven (7)  major recalls due to some 295 complaints by owners to the National Highway Traffic Safety Administration (NHTSA). When these statistics are compare to the more reliable models, like the Volkswagen Golf GTI and the Tiguan which had absolutely no recalls and a very small number of complaints registered with the NHTSA, one notices the reliability factor.

MISLEADING DATA

This reminds me of how computer hardrives manufactures like Seagate, Western-Digital and Hewlett-Packard etc label hardrives by rating them at 1 Million hours  — MTBF (mean time before failure). One would be misled to believe when manufacturers as a whole guarantees the item/part in question for 1 million hours of operation before failure,. Whereas the said item has not even been in existence or production for this length of time, let alone tested for failure for this duration. One (1) million hours roughly equates to 114 years, so one can see how misleading that rating really is.

WHAT MTBF REALLY MEANS

Having said all that, I feel that MTBF is a really bad measure for determining the probable life span of any item, be it a hardrive, a light bulb, a printer, a TV, a car part or an entire car. However, what MTBF really means, is that if the manufacturer built 1 million units and started running burn-in test on all of them at the same time, one item is expected to fail per hour.  The same hold true for producing 5000 units, implying 1 unit will fail every 5000 hours. This is especially true for electronic components, its failure varying between the stringent implementation or slack specification and tolerances they are manufactured under. 

The German tradition and culture of manufacture in general gives rise to vehicles one can rely on with proven reliability and durability based on robust design, assembly, pride and attention to detail. This is noticeable on cars built and assembled in  Wolfsburg, Lower Saxony, Germany when compared to German designed cars manufactured/assembled elsewhere among which are South Africa, Mexico, Brazil, Asia etc. 

If your Volkwagen's VIN number starts with SN, ST or W you have a car that may outlast you whereas any other "world manufacturer identifier" prefix will virtually guarantee you a life of replacing parts. Purely because they are assembled from parts originating from ancillary OEM parts manufacturers and Chinese auto parts manufacturers instead of genuine VW parts originating from Germany.

Common Problems on Volkswagen vehicles mainly stems from these sub-standard rogue parts and several of them may be responsible for your Overactive Check Engine Light, from your leaking coolant, to excessive oil use and smoking, to engine overheating, to mention but a few.

EXCESSIVE SMOKING

Hard plastic has become the preferred product from which to manufacture modern day car spare parts —  in place of diecast aluminum machined to perfection —  and is used in abundance in most cars to reduce manufacturing costs, the overall weight of the vehicle that consequently improve its millage. 

However these plastic parts do become brittle over time thus prone to failure due to the engine heat. For example a blocked plastic PCV (Positive Crankcase Ventilation) valve — responsible for extracting the blow-by gases from the crankcase —  may be the cause of rough idling, poor acceleration and an increase in oil consumption and as a consequence excessive exhaust smoke. When detected by to O2 sensor will cause the Check Engine Light (CEL) to trigger.

OVER HEATING

Plastic thermostat assemblies commonly leak prematurely when they become contaminated by engine oil from a leaking PCV system. This may lead to that stubborn coolant leak that you cannot find  is more-likely-than-not caused by plastic pipe couplings, plastic hoses connectors, or perhaps the plastic radiator tanks located behind the AC condenser  that developed a minute crack, all able to cause overheating.