Overactive Check Engine Light

AUTOMOTIVE RELIABILITY  

All automotive manufacturers have reliability issues with some or certain of their vehicles and Volkswagen is no exception even though it is one of the largest car manufacturer in the world. Globally the masses buy cars in general based on its looks (aesthetics), price, performance and reliability but not necessarily in that order.

In my opinion, reliability play a major role in decision making and should always be considered first. Hence, the question that begs to be asked is, "What's the use of owning a smart looking car with better than average performance that you acquired at a very attractive price but is as unreliable as a career politician". 

Understandably car manufacturers at times produce lemons (The Monday Car) or unknowingly fit a substandard part to some of the vehicles which only becomes apparent when it starts to fail in the field, necessitating a recalls. However, often times these troublesome parts slip through the cracks and fail infrequent enough and disparate enough as not to alert car owners to this pending problem and that is replaceable under recall. 

As a consequence car owners foot the repair bill for something that may never have been necessary to fix or replace if the manufacturer did their due diligence by adequately testing these parts before use. Any and all parts not tress tested or burn-in tested invariably fails and these failing parts then becomes known as Common Problems that plague the car owners.

Case in point, the Volkswagen Jetta 2006 - 2019 appears to have the most issues — aka Common Problems — necessitating seven (7)  major recalls due to some 295 complaints by owners to the National Highway Traffic Safety Administration (NHTSA). When these statistics are compare to the more reliable models, like the Volkswagen Golf GTI and the Tiguan which had absolutely no recalls and a very small number of complaints registered with the NHTSA, one notices the reliability factor.

MISLEADING DATA

This reminds me of how computer hardrives manufactures like Seagate, Western-Digital and Hewlett-Packard etc label hardrives by rating them at 1 Million hours  — MTBF (mean time before failure). One would be misled to believe when manufacturers as a whole guarantees the item/part in question for 1 million hours of operation before failure,. Whereas the said item has not even been in existence or production for this length of time, let alone tested for failure for this duration. One (1) million hours roughly equates to 114 years, so one can see how misleading that rating really is.

WHAT MTBF REALLY MEANS

Having said all that, I feel that MTBF is a really bad measure for determining the probable life span of any item, be it a hardrive, a light bulb, a printer, a TV, a car part or an entire car. However, what MTBF really means, is that if the manufacturer built 1 million units and started running burn-in test on all of them at the same time, one item is expected to fail per hour.  The same hold true for producing 5000 units, implying 1 unit will fail every 5000 hours. This is especially true for electronic components, its failure varying between the stringent implementation or slack specification and tolerances they are manufactured under. 

The German tradition and culture of manufacture in general gives rise to vehicles one can rely on with proven reliability and durability based on robust design, assembly, pride and attention to detail. This is noticeable on cars built and assembled in  Wolfsburg, Lower Saxony, Germany when compared to German designed cars manufactured/assembled elsewhere among which are South Africa, Mexico, Brazil, Asia etc. 

If your Volkwagen's VIN number starts with SN, ST or W you have a car that may outlast you whereas any other "world manufacturer identifier" prefix will virtually guarantee you a life of replacing parts. Purely because they are assembled from parts originating from ancillary OEM parts manufacturers and Chinese auto parts manufacturers instead of genuine VW parts originating from Germany.

Common Problems on Volkswagen vehicles mainly stems from these sub-standard rogue parts and several of them may be responsible for your Overactive Check Engine Light, from your leaking coolant, to excessive oil use and smoking, to engine overheating, to mention but a few.

EXCESSIVE SMOKING

Hard plastic has become the preferred product from which to manufacture modern day car spare parts —  in place of diecast aluminum machined to perfection —  and is used in abundance in most cars to reduce manufacturing costs, the overall weight of the vehicle that consequently improve its millage. 

However these plastic parts do become brittle over time thus prone to failure due to the engine heat. For example a blocked plastic PCV (Positive Crankcase Ventilation) valve — responsible for extracting the blow-by gases from the crankcase —  may be the cause of rough idling, poor acceleration and an increase in oil consumption and as a consequence excessive exhaust smoke. When detected by to O2 sensor will cause the Check Engine Light (CEL) to trigger.

OVER HEATING

Plastic thermostat assemblies commonly leak prematurely when they become contaminated by engine oil from a leaking PCV system. This may lead to that stubborn coolant leak that you cannot find  is more-likely-than-not caused by plastic pipe couplings, plastic hoses connectors, or perhaps the plastic radiator tanks located behind the AC condenser  that developed a minute crack, all able to cause overheating.

VW POLO CANBUS

If you own a Volkswagen Polo, you more likely that not already know that a Controller Area Network (CAN) bus is an automotive wire network loosely referred to as a bus. The word "bus" comes from the electrical power distribution sector where bus-bars were considered a metalic strip made of copper, brass or even aluminium that served as a source of electric power to the load. 

CAN BUS

However CAN Bus is more akin to Ethernet than a bus-bar. Ethernet is a computer networking technology using Unshielded Twisted Pair cable (UTP) either CAT5 or CAT6 which is now commonly used in local area networks capable of sending  IPv4 / IPV6 packet across its networks at speeds ranging from as slow as 10Mb/s to as fast as 1000 Gb/s, hardware dependent of course. 

Twister pair electrical wires with various colour tracers.

Likewise CAN is a network technology commonly used in automotive networks capable of sending CAN-frames across its network at various speeds, again application dependent. It is essentially a  very reliable multi-master arbitration free serial bus, connecting numerous Electronic Control Units (ECUs) aka nodes together.

CAN BUS vs ETHERNET

The big difference between the two, is that Ethernet is an 8-wire bus comprising of 4 unshielded twisted pairs of wire, each with a specific colour coding, whereas CAN has only a single unshielded twisted pair of wires also with a specific colour coding. The CAT5 protocol insists on 2 twists per centimeter and CAT6 with more twists per centimeter whereas the CAN protocol insists on a 1 turn per centimeter. The lay of these wires are very specific and necessary to reduce or cancel interfering signals picked up from the environment by them, which is more commonly referred to as "crosstalk".

CAN BUS HIGH & LOW

Bearing in mind CAN comes in two varieties used for different functions, viz CAN-High (CAN-H) and CAN-Low (CAN-L).  CAN-H is used for the Powertrain, the Convenience and Infotainment buses. 

Whereas CAN-L is used for the rest of the bus wiring.  Both CAN-High and CAN-Low uses different colour wires for different makes of vehicle. For example:-

Manufacturer        CAN High        CAN Low

Mercedes                  Brown/red         Brown

Volvo                        White                Green

Vauxhall                   Green                White 

BMW 1 & 3             Green/orange     Green 

BMW 5 & 6             Black                 Yellow 

Porsche                     Yellow              Black

The big difference between the three buses for VW,SEAT, Skoda and Audi is that:-

1) The Powertrain bus wires interconnected to all the powertrain modules / nodes are coded Orange & Black CAN-H 

2) The Convenience bus wires interconnected to all the convenience modules / nodes are coded Orange & Green CAN-H 

3) The Infotainment bus wires  interconnected  to the infotainment modules / nodes are coded Orange & Violet /Purple CAN-H 

4) CAN-L bus wires to all the interconnected convenience modules / nodes are coded Orange & Brown. (Electronics colour code 31)

REPAIRING WIRES

CAN wires are typically multi-strand 0.35mm to 0.5mm square with 120 ohm termination impedance, capable of transmitting information using two complementary signals which makes them even less prone to crosstalk. But thin wires are prone to break and if and when they do, it is recommended  that when repairing these CAN Bus wires, that both wires must always remain the same length and of equal thickness. 

Implying CAN BUS is extremely unforgiving. So, when wire 1 of the pair is broken, wire 2 should also be cut and the piece of wire added in-between must be exactly the same length; and that the lay length of 1 turn per centimeter must be observed. 

ELECTRICAL INTERFERENCE

Failure to do so, may created a discrepancy in the wire length of the one wire in the twisted pair as well as in their differential voltages, hence result in network errors — ground noise, electrical interference, hum, buzz,  spark plug spikes — cannot and will not be appropriately cancelled. 

Whenever repairs are made to any CAN Bus wiring, it is highly recommended that all CAN Bus wire repairs are covered and highlighted with yellow insulation tape to signify to anyone doing successive work, that a previous repair was carried out. 

That EPC light.

The most likely reason you're reading this blog post, is because you encountered an EPC fault with your Volkswagen vehicle. I bet you wondered what that yellow/orange light was when it lit-up or perhaps startled when you car went into "limp mode". Whether you're driving a VW Polo or VW Jetta, VW Golf,  VW Caddy, VW Passat, T-Cross, Sharan, Touareg, Transporter, or any other Volkswagen or even a German Audi, or a Czech Skoda or a Spanish VW SEAT, you've come to the right place because they all have an  Electronic Power Control circuit. 

In fact all "modern day" vehicles have EPC circuit, which loudly says that the automotive industry have finally reached some consensus on standardization. But let me tell you what the EPC light actually is. It's just a signal light informing you that there is an error in your vehicles torque circuit. That's the short answer, however, I can tell by the look on your face that it wasn't a  satisfactory answer, so let me give you the long version.

The EPC light is part of the Electronic Power Control Circuit which is just one of the components of OBD-II which was mandated by a certain regulatory bodies with regulatory intent. Their initial intention was to limit carbon emissions / exhaust fumes from cars on the street of America. 

The California Air Resources Board (CARB) and the Environmental Protection Agency (EPA) together with the Society of Automotive Engineers (SAE) and the International Organization for Standardization (ISO) collectively originated the On-Board Diagnostic (OBD) System because of high levels of smog produced by automobiles throughout the USA.  

Their initial On-Board Diagnostic System was subsequently superseded by the all new and improved verion OBD-II, hence all cars manufactured post 1996 has an Electronic Power Control Circuit and by extension an EPC light. The European on-board diagnostics (EOBD) regulations are the European equivalent of the American OBD-II. 

On-Board Diagnostic (OBD-II) is an automotive mechatronic, micro processor / micro controller based computer system with programmed presets that continuously monitors inputs from numerous sensors fitted through the car. 

It then computes/compares/ compensates these inputs against stored data and drives various actuators to perform certain tasks. In a nutshell OBD-II is an input/output (I/O) information processing system much like the PC / laptop / or even your smart phone. By example, a keyboard, a mouse, a joystick, a scanner and a microphone are common computer input devices whereas a HD monitor, a printer, speakers and headphones are common computer output devices. 

Here the computer/laptop makes calculations based on its internal operating system and software to do something intelligible for humans. However in the case of OBD-II, its CPU (Central Processing Unit) is called an ECU (Electronic Control Unit) and among its input sensors are the Accelerator Position Sensor, Mass Air Flow sensor (MAF), Lambda O2 Sensor, Knock sensor, Oli level sensor, Coolant Temperature Sensor, the Camshaft Position Sensor, the Crank Position Sensor, the Wheel Speed  Sensor etc, to mention but a few.

Among its output actuators and solenoids are the drive-by-wire electronic throttle actuator, the fuel injectors, the EPC light, Malfunction Indicator Light (MIL), the Immobilizer, the Airbags and the Power Steering Pump, etc, again to mention but a few,

This ECU is sometimes referred to as an Engine Control Unit especially when intending to make reference to the TCU (Transmission Control Unit). The ECU is sometimes even called ECM (Engine Control Module) when making reference to other electronic control modules like the ABS module, the Instruments module, the Central Electronics Module, the CAN gateway module, the Radio Module, etc, again to mention but a few 

However, the ECU and the TCU are collectively referred to as Powertrain Control Module (PCM). The ECM essentially controls the efficiency of the engine performance by using a Crankshaft Position Sensor to determine the position of the cams in order to activate the injection of fuel into the cylinders and the timing of the ignition spark to ignite it at precisely the correct moment in petrol engines. 

Likewise the ECM in Diesel engines, plays a huge role in the success of the turbodiesel models. But in order for this to happen, an electronic throttle control had to be introduced, replacing the  cable from the pedal to the carburetor system which was prone to idle speed deviation between a hot and cold engine that became more and more prevalent as the components wore out. 

In so doing, the ECM can adjust the electronic throttle angle during acceleration to achieve the right quantitative relationship ratio between the actual airflow through the engine and the injected fuel thus maintaining Stoichiometry. Controlling the throttle airflow on the fly, markedly improves overall torque and driveability which is known as torque-mapping, an advantage that is only possible with drive-by-wire. 

So, the Electronic Power Control Circuit consists of the ECM, the Accelerator Position Sensor, the Throttle Position Sensors, the Throttle Actuator, the MAF / Air Filter, the Fuel Injectors, the High Pressure Fuel Pump, Fuel Temperature Sensor, Fuel Rail Pressure Sensor and Pressure Relief Valve. 

The single accelerator position sensor is made up of two individual potentiometers each acting independently of the other but collectively operate with opposite polarity voltages supplied by the ECM, as a safety back-up for one another. 

Thus, if either potentiometer fails, the ECM will activate limp mode. This is a safety measure that prevents the system from acting as if it had an accelerator cable that got stuck in the runaway position and the makings of a potential accident. The cruise control also has influence on the throttle body and requires the brake pedal to be depressed to cancel the cruise control. 

The ECU normally takes this cancellation signal from the brake light MOSFET low-side driver in the ECU. So either the brake pedal switch and the a brake light bulb can cause an EPC error along with the aforementioned fuel supply components. It's best to have a diagnostic tester to check for DTC errors via the DLC connector. It would at the very least steer you in the right direction to fix your EPC problem effectively.

Electronic Power Control (EPC)

It was very surprising to discover how many thousands if not millions of car owners out there, have no idea exactly what  Electronic Power Control (EPC) is. Yet most of them would like to know what the Electronic Power Control (EPC) circuit really does , more especially the Volkswagen, Audi, Seat and Soda owners. 

Considering they've been plagued by the Electronic Power Control (EPC) light, limp mode, DTC errors and poor engine performance to the point of frustration and panic for a number of years. Nobody seems to be able to give them good advice or practical guidance; and in many cases not even the Volkswagen, Audi, Seat and Skoda agents can. 

Leaving VW owners confounded, disappointed and disillusioned by their choice in cars, which results in so many car owners swearing, never to invest in VW brands ever again.

Unscrupulous motor mechanics tend to take advantage of these situations, recommending that the car owner brings their car to them as soon as possible before damage occurs to the engine.  Whereas in fact, the Electronic Power Control (EPC) is a safety circuit designed to prevent damage to the engine. 

When the  Electronic Power Control (EPC) mode does engage, it can and often does affect the car's stability and cruise control and torque circuit giving the impression there is a lot more wrong than there actually is. 

Since the Electronic Power Control (EPC) is "yellow" and not red, it acts more as an advisory light rather than a warning light, even though everybody tends to call it a warning light. A  flashing amber light is considered a "warning signal" but still doesn't have the danger status of "red warning light". 

 


Technically the "yellow" Electronic Power Control (EPC) light is in fact  amber which is a blend between orange and yellow. Car dashboard light colours can be roughly divided into three categories. 

Warning lights are Red in colour. Advisory lights are  amber in colour and information lights are generally either white, green or blue in colour. Having said that, its simple to understand that amber implies that you should keep an eye on, or be prepared for either  a reduction in power or  interruption to power.

Hence, Amber lights are used as Indicator lights (flashers) on cars for the turn signal and hazards. Amber lights are also used by roadside breakdown vehicles to alert drivers. An amber traffic light is generally considered a cautionary light, signalling  readiness to stop. Much like an amber  traffic light does. 

Now that you know what the colours of the lights imply, allow me to give you the low-down on Electronic Power Control (EPC) itself. EPC is an acronym and it is the official abbreviation for Electronic Power Control. 

Electronic Power Control is an embeded system, specifically designed into electronic circuits that permits it be part of a larger electro-mechanical system.  An Electronic Power Control system can also simply be described as a self-contained "feedback" circuit.  

It can even be further  explained, as a microprocessor based electronic circuit -or a computer if you like- that alters its output bias based on its inputs. Its "status quo" or current baseline is taken as a reference point and the objective is to control its operation within its predetermined parameters, and as close as possible to the said baseline, based on the signals from its inputs. 

Should any of these inputs, that predominantly come from sensors fail, for whatsoever reason, the computer circuit wouldn't be unable to complete its processes and would either enter into a "compensatory state", a "warning state" or an "error state". But more about this later!

The Electronic Power Control circuit has become standard equipment as part of the OBD-II (On-board Diagnostics 2) system in all modern day cars, manufactured since 1996. The Electronic Power Control is an integral part of every computerized ignition and engine management system, embedded into the ECU (elcectronic computer unit). 

The Electronic Power Control (EPC) dashboard advisory light is also part of this system and is normally activated by errors in the vehicle's torque circuit but not exclusively. The Electronic Power Control (EPC) light is  actually  a "new" addition to the plethora of light on the more modern vehicle's dashboards, a light  that gives any driver a sense of despair when it turns on. 

But more about that later ...

However, since a full blown explanation is outside the scope of a single blog-post, it is imperative that you need to read  every blog installment or the entire blog to get the full Electronic Power Control (EPC) picture.

____________________________________________________________________

vw polo fault codes list, vw polo power steering failure, epc light vw polo loss of power, vw polo power steering not working, vw polo epc light and loss of power, vw polo power steering reset, vw polo engine management light loss of power, vw polo limp mode, vw polo 1.4 engine problems, vw polo limp mode, epc vw polo, vw polo common faults, vw login codes, vw polo door lock problem, vw polo throttle body problems, vw 01044, vw polo fuel pump problems, vw polo power steering fuse location, vw polo power steering pump problem, volkswagen polo fuel pump problem, epc light vw polo, vw polo central locking problems, epc polo, vw polo accelerator problems, vw polo power steering sensor location, vw polo error codes, vw polo epc, polo power steering not working, vw relay numbers, vw polo epc light, Accelerator Pedal Position Sensor 2 G185, Accelerator Position Sensor G79, Volkswagen, DTC, On Board Diagnostic, Body Codes, Bluetooth OBDII Scanner, vehicle diagnostics, OBD2,OBD-II, CAN bus, OBD2 parameter IDs (PID), OBD2 scanner, Diagnostic Trouble Codes (DTCs), 16 pin OBD2 connector, DLC, ISO 11898, SAE J1962, OBD3/OBD-III, CAN logger, B codes, WiFi, OBD2 frames, IoT logger, OBD2 Data, OBD2 blackbox, Scanner, Network Codes, Diagnostic tools, Code Reader,Mobile Car Diagnostics, OBD-11 Scanner,OBD dongle, J1939, diagnostics,universal codes,Diagnostic trouble codes,Check Engine Light, P codes, C codes, ISO 15765, U codes, car diagnostic tests, CPU,OBD Cables, Diagnostic cables, Key programming, fuel management system,engine control unit, EPC light, limp mode